Installing The Bumper; Installing The Seats - Toro 07287TC Operator's Manual

Figure 5
1. Steering wheel
2. Nut
Step
4

Installing the Bumper

Parts needed for this step:
1 Bumper
Procedure
1. Remove the 2 bolts, washers, and nuts secured
to the front of the frame.
2. Align the mounting holes and secure the
bumper to the frame with the fasteners
previously removed (Figure 6).
Figure 6
1. Bumper
3. Washer
4. Foam seal
Step
5

Installing the Seats

Parts needed for this step:
2 Seat
Procedure
Insert the seat bracket into the seat base opening
and pivot the seat downward (Figure 7).
Figure 7
1. Seat bracket
14
2. Seat base