Step
5
Installing the Hitch
Parts needed for this step:
1
Hitch
Procedure
1. Remove the 4 bolts and nuts from the inside
rear of the frame.
2. Align the hitch with the mounting holes on the
frame. Secure the hitch with the screws and
nuts (Figure 7).
Figure 7
1. Hitch
Step
6
Installing the Cargo Box
Parts needed for this step:
1
Cargo box
1
Right-hand pivot bracket
1
Left-hand pivot bracket
4
Flange head screw (3/8 x 1 inch)
1
Bolt (5/16 x 3/4 inch)
1
Flange nut (5/16 inch)
Procedure
1. Position the cargo box onto the frame. The
cargo box must lay flat and be centered.
2. Mount the left hand pivot bracket to the left
rear corner of the frame with 2 flange head
screws (3/8 x 1 inch). Position the bracket as
shown in Figure 8.
1. Pivot bracket
3. Slide the cargo box mounting hole onto the
pivot bracket (Figure 9).
13
Figure 8