Installing The Hitch; Installing The Cargo Box - Toro 12004TC Operator's Manual

5

Installing the Hitch

Parts needed for this procedure:
1 Hitch
Procedure
1. Remove the 4 bolts and nuts from the inside rear
of the frame.
2. Align the hitch with the mounting holes on the
frame. Secure the hitch with the screws and nuts
(Figure 7).
1. Hitch
Figure 7
6

Installing the Cargo Box

Parts needed for this procedure:
1 Cargo box
1 Right-hand pivot bracket
1 Left-hand pivot bracket
4 Flange head screw (3/8 x 1 inch)
1 Bolt (5/16 x 3/4 inch)
1 Flange nut (5/16 inch)
Procedure
1. Position the cargo box onto the frame. The cargo
box must lay flat and be centered.
2. Mount the left hand pivot bracket to the left rear
corner of the frame with 2 flange head screws (3/8 x
1 inch). Position the bracket as shown in Figure 8.
1. Pivot bracket
3. Slide the cargo box mounting hole onto the pivot
bracket (Figure 9).
13
Figure 8