BOMBARDIER traxter max series Operator's Manual page 138

Properly reinstall removed parts in the
reverse order of their removal.
Adjust beam aiming as follows:
Turn knobs to adjust beam height and
side orientation to your convenience.
Adjust both headlamps evenly.
3 1
V04G02Z
1. Headlamp cover
2. Beam height adjustment
3. Beam side adjustment
Auxiliary Headlamp
CAUTION:
Never touch glass por-
tion of an halogen bulb with bare
fingers, it shortens its operating life.
If glass is touched, clean it with iso-
propyl alcohol which will not leave
a film on the bulb.
Insert a little flat screwdriver into the
slot at the bottom of the speedome-
ter. Slightly, pry the speedometer and
turn it clockwise then remove it from
steering pod.
_____________________
138
2
V01A67Y
Unplug the auxiliary headlamp then
turn the socket counterclockwise to
unlock it. Pull the socket out of aux-
iliary headlamp housing and remove
bulb.
Install a new bulb then place the
socket into housing. It is important to
position the socket connector down-
wards.
Reinstall all removed parts.
Taillight
Unscrew lens screws to expose bulb.
2
V01L0HY
1. Lens
2. Screws
Push bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
1 2