BOMBARDIER traxter max series Operator's Manual page 137

V00G01Y
TRAXTER MAX 5 SPEED
1. Ignition system
2. Accessories (power outlet and
auxiliary supply)
3. Solenoids
4. Fan
5. MPEM (Multi-Purpose Electronic Module)
6. Charging system
To remove fuse from holder, remove
the fuse holder cover then pull fuse
out. Check if filament is melted.
A15E0KY
TYPICAL
1. Fuse
2. Check if melted
Bulb Replacement
Always turn the ignition switch
OFF before replacing a defective
bulb.
Always check light operation after re-
placement.
Headlamps
CAUTION:
tion of an halogen bulb with bare
fingers, it shortens its operating life.
If glass is touched, clean it with iso-
propyl alcohol which will not leave
a film on the bulb.
Unplug connector from headlamp.
1
V04G02Y
Rotate the bulb socket counterclock-
2
wise then remove headlamp.
V04G03Y
1. Unlock
2. Lock
_____________________
WARNING
Never touch glass por-
1 2
137