BOMBARDIER traxter max series Operator's Manual page 133

V01C05Y
TYPICAL — TRAXTER MAX 5 SPEED
1. Clean-out plug
2. Muffler
Block the end of muffler with a shop
rag and start engine.
Momentarily increase engine RPM
several times to purge accumulated
carbon out of the muffler.
Stop engine and allow muffler to cool.
Reinstall the clean-out plug.
Radiator
Periodically check the radiator area
and the air ducts for cleanliness. En-
sure air ducts are unobstructed to
allow air flow going to the radiator.
An access hole is available to inspect
the radiator condition and to give ac-
cess for cleaning.
Remove seat.
Pull on the circumference of the ac-
cess plug and remove plug.
1 2
_____________________
V01A49Y
1. Access plug
Inspect radiator fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator from cooling properly.
Remove as much deposits as you can
with your hands. If water is available
in proximity, try rinsing the radiator
fins.
If available, use a garden hose to rinse
the radiator fins.
WARNING
Never clean radiator with your
hands when it is hot. Let the radi-
ator cool down before cleaning.
CAUTION:
Be careful not to dam-
age the radiator fins when clean-
ing. Do not use any object/tool that
could damage the fins. The fins are
purposely thin parts to allow effi-
cient cooling. WHEN HOSING, USE
LOW PRESSURE ONLY. NEVER USE
A HIGH PRESSURE WASHER.
Properly reinstall access plug and seat.
Carburetor
See an authorized Bombardier ATV
dealer each year to verify and clean
the fuel system.
1
133