Table of Contents
Advertisement
V01I08Z
1. Engine
2. High intensity
3. Reverse
4. Neutral
Engine
Dual function light. When continuous-
ly on, it indicates a low oil pressure
condition of the engine. When flash-
ing, it indicates the engine is overheat-
ing.
This light turns on when the ignition
switch is turned on and remains on un-
til engine is running.
CAUTION: If the light does not turn
off right after engine starting, stop
engine. See an authorized Bombar-
dier ATV dealer. Do not use the vehi-
cle until repaired.
If engine overheats, refer to Engine
Overheat in SPECIAL PROCEDURES.
High Intensity
When the indicator light is ON, it indi-
cates the high intensity is selected on
the headlights.
Reverse
When lit, it indicates the transmission
is engaged in reverse.
Neutral
When lit, it indicates the transmission
is in neutral position.
34
4
3
1
2
10) Speedometer
Located in center of cluster. It indi-
cates the speed of the vehicle either in
km/h or MPH. The speedometer is
backlit every time the ignition switch
is turned on (either position).
2
V01I080
1. Speedometer
2. Odometer/trip meter
3. Display selection button
Odometer/Trip Meter
Combined LCD (Liquid Crystal Dis-
play) display. Odometer records the
total distance traveled in either kilome-
ters or miles. The trip meter records
the distance traveled either in kilome-
ters or miles until it is reset. The last
right digit indicates the tenth of a kilo-
meter or a mile. It can be used to ap-
proximately monitor the fuel tank
range or distance between two loca-
tions for instance.
Display Selection Button
The odometer always appears when
turning the ignition switch ON (either
position). To change the display to the
trip meter, momentarily press the but-
ton on the speedometer.
To reset the trip meter, push and
HOLD button until all numbers read
zero (while in trip meter selection).
3
1
Hide quick links:
Advertisement
Table of Contents
