BOMBARDIER 1999 Traxter Operator's Manual page 72

DIMENSIONS
Dry mass
Overall length
Overall width
Overall height
Wheel base
Wheel track
Turning radius
Toe-in adjustment
Ground clearance
Weight distribution (front/rear)
LIQUIDS
Oil type (engine and transmission)
Coolant
Fuel
Differential
Hydraulic brake
Propeller shaft joint grease
CAPACITIES
Vehicle range
Fuel tank
Engine/transmission oil
Coolant
Differential
OD = outside diameter
ID = inside diameter
dia. = diameter
BOMBARDIER INC. reserves the right to make changes in design and specifica-
tions and/or to make additions to, or improvements in its products without im-
posing any obligation upon itself to install them on its products previously manu-
factured.
70
343 kg (755 lb)
2071 mm (81.5 in)
1194 mm (47 in)
1143 mm (45 in)
1296 mm (51 in)
Front 992 mm (39 in)
Rear 940 mm (37 in)
3.3 m (11 ft)
0 mm (0 in)
Front and under
244 mm (9.6 in)
engine
Rear axle 188 mm (7.4 in)
49/51%
SAE 10W40, 4-stroke mineral-based engine oil.
API classification SF, SG or SH. Do not use synthetic or
semi-synthetic oi
Ethyl glycol/water mix (60% coolant, 40% water).
Use coolant specifically designed for aluminum engines
Type Regular unleaded gasoline
Octane 87 (R + M)/2 or higher
Front Synthetic polyolester oil 75W90 (API GL-5)
Rear Synthetic polyolester oil 75W90 (API GL-5)
Brake fluid, DOT 4
Shell, Alvania EP-2 only
Approximately 10 hours depending on many factors such
as temperature, operating conditions and load
20 L (5.7 U.S. gal) including approximately 6 L
(1.6 U.S. gal) reserve
Oil change with filter: 2.5 L (2.3 U.S. quarts).
Total: 3 L (3.2 U.S. quarts)
2.5 L (2.2 U.S. quarts)
Front 650 mL (22 U.S. oz)
Rear 300 mL (10 U.S. oz)
l
W = width
OHV = overhead valve
LEDS = light-emitting diodes