Table of Contents
Advertisement
Seat Removal
Pull latch upward while gently lifting
rear of seat. Continue lifting move-
ment until you can release the front re-
taining devices then completely re-
move seat.
Seat Installation
Place seat to allow the insertion of the
U-shaped bracket over the rollers.
Gently slide the brackets over rollers
then lower seat. When seat rests in its
position, firmly push seat down to
latch.
V01L0BY
1. U-shaped bracket
2. Rollers
WARNING
Periodically verify the seat lock
pin and tighten if needed. Make
sure seat is securely latched be-
fore riding.
21) Front/Rear Cargo
Racks
Located on top of chassis at front and
rear. Convenient racks to carry gear.
WARNING
Ensure to properly secure materi-
al to rack. Do not overload. Ensure
load does not interfere with visi-
bility and/or steering. Do not carry
passenger(s).
Refer to SPECIFICATIONS for carrying
loads and cargo weight distribution
recommendations.
22) Air Duct
Located on rear fenders. They force
the flow of air to cool radiator.
CAUTION: Do not place anything
over air intake ducts.
23) Trailer Hitch
Located on rear axle. Convenient hitch
to install a ball to tow a trailer or other
equipment. Install the proper ball size
as per trailer manufacturer recom-
mendations. Refer to SPECIFICA-
TIONS for carrying loads and towing
recommendations.
2 1
V01L0NY
1. Trailer hitch
Ensure to install the proper ball
size that matches the equipment
you will tow.
Follow manufacturer instructions for
proper attachment.
24) Radiator Cap
Located at rear of rear panel. It pro-
vides access to the radiator filling
neck.
Pull the protector cap to give access to
the radiator cap. When finished, prop-
erly reinstall radiator cap then protec-
tor cap.
1
WARNING
39
Hide quick links:
Advertisement
Table of Contents
