Wheel Bearing Condition; Brake; Suspension; Body/Frame - BOMBARDIER 1999 Traxter Operator's Manual

Wheel Bearing Condition

Push and pull the wheels from the up-
per edge to feel the play. See an au-
thorized Bombardier ATV dealer if
there is any play.
V01A0MY

Brake

Front Brake
The front brakes are hydraulic disc
types. These brakes are self-adjusting
and require no adjustment.

Suspension

Inspect shock absorber for oil leaks
and fasteners for tightness. See an au-
thorized Bombardier ATV dealer as
necessary.

Body/Frame

Engine Compartment
Check engine compartment for any
damage and leaks. Ensure all hose
clamps are properly secured and no
hose is cracked, kinked or otherwise
damaged.
Inspect muffler, battery and reservoir
fastening devices. Check electrical
connections for corrosion and tight-
ness.
Replace or have damaged parts re-
paired.
Skid Plate Condition
Check tightness of fasteners and con-
dition of plate for cracks or other dam-
age. Properly retighten fasteners as
necessary and have skid plate re-
placed if damaged.
Hitch/Trailer Ball Condition
Check tightness of fasteners and
tightness/condition of trailer ball. Prop-
erly retighten as necessary and re-
place ball if worn.
Fasteners
Check fastener condition and tight-
ness on the vehicle. Retighten as re-
quired.
Seat Latch
Remove seat and check latch mecha-
nism and pin for wear. See an autho-
rized Bombardier ATV dealer for parts
replacement if damaged.
Front Storage Compartment
Latch
Check latch condition. See an autho-
rized Bombardier ATV dealer for parts
replacement if damaged.
Vehicle Cleaning and
Protection
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
CAUTION: Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.
63