Setting The Host Link Method - Omron Programmable Terminals NT31 NT31C Setup Manual

Setting Conditions for Communications with Host by Using Memory Switches

6-7-2 Setting the Host Link Method

160
Set the communication conditions for the host link method at serial port A or seri-
al port B by following the operation from the System Menu shown below.
Ver 3.10
Select Maintenance Mode.
Select Memory Switch.
Display the fourth memory switch screen by
pressing the [↓] (next screen) or [↑] (pre-
vious screen) touch switch.
Press the touch switch corresponding to the
port at which the host link method is to be set
(Comm. A Method or Comm. B Method) to
display the setting option Host Link.
The setting option changes each time the
touch switch is pressed.
Section 6-7