Omron Programmable Terminals NT31 NT31C Setup Manual page 158

Memory Initialization
148
Initialize the memory tables by following the menu operation from the System
Menu shown below.
Ver 3.10
If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU screen
without initializing the memory tables.
On completion of memory table initialization, the message Finished is displayed
and the NT31/NT31C returns to the MEMORY INIT. MENU screen.
Select Maintenance Mode.
Select Memory Init..
Select Memory Table.
Select Yes.
The memory tables are initialized. During ini-
tialization, the message Initializing is dis-
played.
Section 6-4