Ford EVEREST Owner's Manual page 91

Message
Brake Fluid Level Low
Check Brake System
Engine Coolant Over
Temperature
Power Reduced to
Lower Engine Temp
Transport Mode Contact
Dealer
Factory Mode Contact
Dealer
See Manual
Park Aid
Message
Check Front Park Aid
Check Rear Park Aid
Front Park Aid On Off
Rear Park Aid On Off
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Information Displays
Indicates the brake fluid level is low and the brake system
should be inspected immediately. See Brake and Clutch
Fluid Check (page 226).
Displays when the brake system needs servicing. Stop the
vehicle in a safe place. Contact your authorized dealer.
Displays when the engine temperature is too high. Stop the
vehicle in a safe place and allow the engine to cool. If the
problem persists, contact your authorized dealer. See Engine
Coolant Check (page 224).
Displays when the engine has reduced power in order to help
reduce high coolant temperatures.
Displays to indicate that the vehicle is still in Transport mode.
This may not allow some features to operate properly. See
your authorized dealer.
Displays to indicate that the vehicle is still in Factory mode.
This may not allow some features to operate properly. See
your authorized dealer.
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
Displays when the system has detected a condition that
requires service. Contact your authorized dealer. See Front
Parking Aid (page 145).
Displays when the system has detected a condition that
requires service. Contact your authorized dealer. See Rear
Parking Aid (page 144).
Displays the park aid status.
Displays the park aid status.
89
Action
Action