Ford EVEREST Owner's Manual page 232

A
E205822
Headlamp assembly:
A. Front parking lamp bulb.
B. High beam headlamp bulb/ Daytime
running lamp bulb.
C. Low beam headlamp bulb.
D. Direction indicator lamp bulb.
Replacing the High Beam Headlamp
Bulb
E205833
1. Remove the service cap.
2. Disconnect the electrical connector.
3. Remove the bulb from the headlamp
assembly by turning it
counterclockwise and pull it straight
1
out.
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Maintenance
B C
D
3 1
4. Install the new bulb in reverse order.
Replacing the Low Beam Headlamp
Bulb
E205825
1. Remove the service cap.
2. Disconnect the electrical connector.
3. Remove the bulb from the headlamp
assembly by turning it
counterclockwise and pull it straight
1
out.
4. Release the retainer spring and remove
the bulb from the headlamp assembly
by pulling it straight out.
1
- Projector type headlamp assembly.
2
- Reflector type headlamp assembly.
Replacing the Front Parking Bulb
1. Turn the bulb assembly
counterclockwise and remove it from
the headlamp assembly.
2. Remove the bulb by gently pulling it
straight out of the socket.
3. Install the new bulb in reverse order.
Replacing the Direction Indicator Lamp
Bulb
1. Turn the bulb assembly
counterclockwise and remove it from
the headlamp assembly.
230
1
3
2