Ford EVEREST Owner's Manual page 89

Hill Descent Control
Message
For Hill Descent Reduce
Speed 20MPH or Less
Hill Descent Control Off
System Cooling
Hill Descent Control
Fault
For Hill Descent Select
Gear
Keys and Keyless Entry
Message
Starting System Fault
To START Press Brake
and Clutch
To START Press Clutch
Key Program Successful
Key Program Failure
Max Number of Keys
Learned
Not Enough Keys
Learned
Everest (TEC) , EB3B-19G219-EKB enAUS, CPE Review
Information Displays
Displayed when vehicle speed is too high for HDC to engage.
Reduce speed to below that indicated in the message to
Displayed when HDC cannot be engaged due to excessive
heat. Allow system to cool before re-engaging.
Displayed when there is a fault with the HDC system. See your
Displayed when HDC cannot be engaged due to vehicle not
being in gear. Select gear to engage HDC.
This message is displayed when there is a problem with your
vehicle's starting system. See your authorized dealer for
Displayed as a reminder to press the brake and clutch while
Displayed as a reminder to press the clutch in while starting
Displayed during spare key programming, when an intelligent
access key is programmed to the system.
Displayed during spare key programming, when an intelligent
access key has failed to be programmed.
Displayed during spare key programming when the maximum
number of keys have been programmed.
Displayed during spare key programming when not enough
keys have been programmed.
87
Action
engage HDC.
authorized dealer.
Action
service.
starting the vehicle.
the vehicle.