MAINTENANCE WORK ON THE CHASSIS
Dismounting the front fender
10.18
Installing the front fender
10.19
Removing the seat
10.20
Mounting the seat
10.21
–
Remove screws
700414-10
–
Position the fender with holding lugs
plate.
700415-01
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
700414-11
–
Open quick release
–
Pull back the seat and remove it.
300633-10
–
Hook the seat onto screw
Projection
300634-10
. Remove the front fender.
into the drill holes on the start number
M6
and raise the rear of the seat.
and lower the seat at the rear while pushing it forward.
hooks into the fuel tank.
.
10 Nm (7.4 lbf ft)
35