MAINTENANCE WORK ON THE CHASSIS
Removing the fork protector
10.7
–
Adjust the fork overhang.
Guideline
Upper triple clamp flush with end of
outer tube
Upper triple clamp flush with 1st ring
Upper triple clamp flush with 2nd ring
Upper triple clamp flush with 3rd ring
Info
700533-01
The setting of the vehicle level via the fork legs must be identical on both
fork legs.
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
300664-11
–
Position brake caliper, mount and tighten screws
Guideline
Screw, brake caliper
–
Position the brake line. Mount the clamp and screws
–
Install the front wheel.
300663-11
x
–
Remove screws
–
Remove screw
700431-01
–
Remove screw
700432-01
.
M8
.
M8
M8
(
p. 58)
x
. Take off clamp
.
on the left fork leg. Take off the fork protector.
on the right fork leg. Take off the fork protector.
Standard
25 Nm
(18.4 lbf ft)
25 Nm
(18.4 lbf ft)
.
20 Nm
Loctite
®
243™
(14.8 lbf ft)
.
29