MAINTENANCE WORK ON THE CHASSIS
Removing the chain guard
10.30
Installing the chain guard
10.31
–
Mount and tighten screws
Guideline
Remaining screws, chassis
300627-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Position the fuel tank breather.
–
Mount the seat. (
300626-11
–
Remove cable binder
–
Take off the chain guard.
100815-10
–
Position the chain guard. Mount cable binder
Info
The cable binder must be run between chain sliding guard
swingarm
100816-10
–
Mount the cable binder at the rear.
–
Align the chain guard so that screws
–
Tighten the cable binder and cut off the ends.
100817-10
.
M6
.
M6
p. 35)
.
.
of the chain guide are visible.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.
and
40