Installing The Fork Protector; Removing The Lower Triple Clamp - KTM 65 SX Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Installing the fork protector

10.8

Removing the lower triple clamp

10.9
x
–
Position the fork protection on the right fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
700432-10
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the brake line. Mount clamp
–
Mount the screws
700433-01
x
–
Remove the fork legs.
–
Dismount the start number plate. (
–
Dismount the front fender. (
–
Remove fuel tank breather
–
Remove screw
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
300666-10
–
Remove protector ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
300667-10
M6
M6
.

.

x ( p. 28)
p. 34)
p. 35)
.

. Remove screw , take off top triple clamp with the handlebar
 
.

30
.

10 Nm (7.4 lbf ft)
.

10 Nm (7.4 lbf ft)