Performing The Configuration Using The Printer's Control Panel (When You First Set It Up) - Canon LBP7660Cdn Manual

Performing the Configuration Using the Printer's Control Panel (When
You First Set it Up)
When configuring the interface using the printer's control panel, use the following menu hierarchy.
*1
[Communication Mode] and [Ethernet Type] are displayed when [Auto Detect] is set to [Off].
*2
[Communication Mode] appears only when [Ethernet Type] is set to a setting other than [1000 Base-T].
Pressing [
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After performing the configuration
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [ ] ( : Back).
About the control panel
For details on the control panel, see
1
Press [ ] (
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
indicator is off).
2
Select [Ethernet Driver] using [
] ( : Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
"Control Panel."
: Settings), select [Network] using [
] and [
] or [
Reset)."
] and [
Online indicator is on) or offline (the
], and then press [OK].
] on the control panel.
], and then press [OK].
0258-06C
Online