Specifying an ID for Each Department (LBP7680Cx Only)
Displaying or Changing the Departmental ID Management Settings
You can manage the number of [Printed Pages]
entering an ID when printing.
* [Printed Pages] indicates the number of printed surfaces. If you perform 2-sided printing on a sheet of paper, the
number of the printed surfaces is two.
IMPORTANT
Register more than one Department IDs before enabling Department ID Management, which will have no effect with no
Department ID registered.
(1)
[Register New Department]
(Displayed only if you have logged on in Administrator Mode.)
Clicking this button displays the [Register New Department] page. You can specify the following settings.
[Department ID]
[PIN]
[Confirm]
(2)
[Dept. ID]
(Clickable only if you have logged on in Administrator Mode.)
Clicking the department ID displays the [Edit Department] page. You can specify the following settings.
[Department ID]
[PIN]
[Confirm]
[Clear Count]
[Total Print]
[Black Print]
*
on a departmental basis by specifying IDs for each department and
Enter the department ID using a number with up to seven digits.
Enter the password using a number with up to seven digits.
Enter the number specified in [PIN].
Enter the department ID using a number with up to seven digits.
Enter the password using a number with up to seven digits.
Enter the number specified in [PIN].
(Not displayed depending on the settings.)
Click [Printed Pages] ([Total Print], [Black Print] and [Color Print]) for this
Department ID.
Displays the number of printed surfaces.
It displays the number of pages printed in black and white.
0258-09K