Printing Cannot Be Performed (Lan Connection) - Canon LBP7660Cdn Manual

Printing Cannot Be Performed (LAN Connection)

If you cannot print when the printer is connected to the computer by a LAN cable, check the problem following the
questions below.
NOTE
For Macintosh users
This section describes the procedure for Windows as an example.
For details on the procedure for Macintosh, see "Driver Guide."
For details on the procedure for displaying "Driver Guide", see
<Question 1> Is the printer turned ON?
Check if the Main Power indicator on the control panel is turned on.
ON
OFF
Cannot be turned ON
<Question 2> Check the indicators on the printer unit.
The Ready indicator is on.
The Ready indicator is blinking.
The Message indicator is on.
The Job indicator is on.
The Job indicator is blinking.
The Paper Source indicator is blinking.
To <Question 2>
Turn the printer ON.
"You Cannot Turn the Printer ON"
To <Question 3>
The printer is warming up. Please wait a moment.
"The Message Indicator Is On"
The printer is operating. Please wait a moment.
If the printer does not perform printing for a while, perform the print
data output or soft reset.
"Canceling a Job"
Load paper.
"Paper Loading and Output"
"Viewing the Driver Guide."
0258-0AE