Table of Contents
Advertisement
5 Set the Photoshop application to run in 32-bit mode.
a) Browse to the application itself in Applications/AdobePhotoshop CS5, right-click on the icon, and select Get
Info.
b) Select the Run in 32 bit mode check box.
6 Start Photoshop, and select File > Import > Fiery Remote Scan 6.
Scanning from the printer control panel
Fiery Remote Scan allows you to use the imagePRESS Server printer control panel to scan an image from the printer
glass (platen) or automatic document feeder (ADF) to the imagePRESS Server.
You can then open the image with Fiery Remote Scan or the Docs WebTool. You can send the scanned job to a hard
disk using a mailbox.
Additionally, you can scan a job directly to the Hold queue, so that you can use the document merging and editing
features of Command WorkStation. For more information about using these features, see Command WorkStation
Help.
Before you initiate the scan, specify the appropriate scan settings for your scan job. To scan at the imagePRESS
Server printer control panel, see
the printer control panel menu, see the documentation that accompanies your printer.
Note: If the Department ID and password are defined on the printer and the printer is set so that it only accepts jobs
with the Department ID and password, the printer will not allow you to scan without the Department ID and
password. This function is called Allow Remote Scan Jobs With Unknown ID (turned on by default). For more
information, see the documentation that accompanies your printer.
Specify scan settings at the printer control panel
Specify scan settings at the imagePRESS Server printer control panel.
1 Press Scanner from the main menu of the printer control panel.
2 Press Online.
3 Position the original face down on the printer's platen glass or face up in the ADF.
4 From within Fiery Remote Scan, use the Scan tab to set options and initiate a scan.
5 Click Scan.
6 In the Save As dialog, specify the file name, file format, and location for saving the scan file.
7 Click Save in the Save As dialog box to initiate the scan. Clicking Cancel returns you to the Fiery Remote Scan
window without the scan being completed.
8 After scan is completed, press offline in the Scanner screen from the main menu of the printer control panel and
remove the original.
Note: If you initiate a scan while a job is processing or printing, scanning starts when processing or printing is
complete. While the job is processing or scanning, the printer timeout does not occur.
Scanning from the printer control panel
on page 37. For information about using
Utilities
37
Scan
Advertisement
Table of Contents
