Canon LBP7660Cdn Manual page 73

2. Specify the target numeric value using [
Each time you press [
decreases by 0.5 mm. Also, if you keep pressing [
increasing or decreasing the value.
The setting value is changed.
If specifying the setting for [Offset X]
1. Select [Offset X] using [
2. Specify the target numeric value using [
Each time you press [
decreases by 0.5 mm. Also, if you keep pressing [
increasing or decreasing the value.
The setting value is changed.
] and [
], the setting value increases by 0.5 mm, and each time you press [
] and [ ], and then press [OK].
] and [
], the setting value increases by 0.5 mm, and each time you press [
], and then press [OK].
] or [ ] without releasing your finger, you can keep
], and then press [OK].
] or [ ] without releasing your finger, you can keep
], the setting value
], the setting value