Automatically Performing Calibration Immediately After The Printer Is Turned On - Canon LBP7660Cdn Manual

Automatically Performing Calibration Immediately after the Printer Is
Turned ON
You can set the timing for performing calibration when the self-diagnostic immediately after the printer is turned ON
determines that calibration is necessary.
1
Press [ ] ( : Online).
The Online indicator goes off, allowing you to specify the settings on the control panel.
2
Press [ ] (
3
Select [User Maintenance] using [
4
Select [First Calibration] using [
5
Select [Color Mismatch Corr.] using [
: Settings).
] and [
] and [
] and [
], and then press [OK].
], and then press [OK].
], and then press [OK].
0258-0LL