Canon LBP7660Cdn Manual page 597

[Substitute Size] [Off], [On]
[Special Image [Off], [Level 1],
Mode] [Level 2]
[ITB Cleaning]
[SD Card Maintenance]
[Format] [No], [Yes]
[Special Print Mode]
[Curl Correction] [Off], [On]
[Rough Paper
[Off], [On]
Adj.]
[Special Env.
[Off], [On]
Mode]
[Update Firmware]
[USB]
[Network]
[First Calibration]
[Color Mismatch [After Jobs],
Corr.] [Immediately]
[Off], [After
[Density Control] Jobs],
[Immediately]
[Paper Feed
Method]
When the paper of the target size is not loaded in the printer, the printer
prints on paper of the following sizes.
Size of the Paper to Be Printed
If the centers of dense text or lines are not being printed, set this to [Level
1].
If the problem still persists after setting it to [Level 1], set it to [Level 2].
When [Special Image Mode] is used, the print density becomes
lower.
Run the ITB Cleaner.
"Cleaning the Transfer Belt"
Delete the contents of the SD card.
When printed paper curls, set this item to [On].
If images with toner of two or more overlapping colors are printed too
lightly when using rough paper, set this item to [On].
Sometimes, depending on the type of envelope and the use environment
(especially humid environments), the envelope flap gets glued down. In
such a case, set this item to [On].
This option is to be executed only when the firmware of the printer needs
to be updated.
Set the operation when there is a request for color shift adjustment
calibration during the printer startup diagnostics.
"Adjusting the Color or Color Mismatch (Calibration)"
Set the operation when there is a request for density control and density
measurement calibration during the printer startup diagnostics.
"Adjusting the Color or Color Mismatch (Calibration)"
Specifies on which side of the loaded paper the printer should print.
Perform printing after selecting the paper drawer or tray to feed paper.
Select the paper source.
"[Setup] Menu ([Paper Source] Options)"
The setting of this item determines which side of paper is printed on. Load
the paper in proper orientation.
[Multi-
"Paper Loading Orientation"
Purpose
If [Speed Priority] is specified, the printing sides of the paper for 1-
Tray]:
sided printing and 2-sided printing do not match.
[Speed
Priority],
[Print Side
Priority]
[Drawer 1]:
[Speed
Priority],
[Print Side
If you specify [Print Side Priority], the printer matches the printing
Priority]
sides of the paper for 1-sided printing and 2-sided printing.
*
Therefore, when you print previously printed paper, you do not need
:
[Drawer 2]
Letter
A4
Printer Driver Setting
A4
Letter