Advertisement
3. Installation
3.1 Installation and Adjustment
1.
For Ceiling Mount / Wall Mount users: Stick the Template Plate on the position where you
want to attach the camera, drill four holes on the Template Plate for screwing the
Adapter Plate with the supplied Screws and Plastic Anchors.
If you wish to run the wires through the wall / ceiling, drill an additional hole in the
middle circle position.. Insert the supplied four Plastic Anchors into the holes.
2.
Remove the Cover Cap, unscrew the four Set Screws using the supplied Hexagon Wrench.
EHD935F eZ.HD Vandal Dome Camera
7
Advertisement
