Related Manuals for EverFocus EHD935F eZ.HD Series
Summary of Contents for EverFocus EHD935F eZ.HD Series
- Page 1 EHD935F eZ.HD Series 1080p Full High Definition True Day/Night Outdoor IR Vandal Dome Camera User’s Manual Copyright © EverFocus Electronics Corp. Release Date: February 2016...
- Page 2 Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.
- Page 3 Safety Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 4: Table Of Contents
Contents 1. Introduction........................5 Packing List ........................5 Features .......................... 5 2. Cable Description ......................6 3. Installation ........................7 Installation and Adjustment ................... 7 4. Configuration in the OSD Menu ..................13 5. Specifications ........................17... -
Page 5: Introduction
EHD935F eZ.HD Vandal Dome Camera 1. Introduction The EverFocus eZ.HD Series EHD935F provides incredible performance in bright light or low light environments, and the resolution listed in the specification from the actual camera you install. To take full advantage of the amazing resolution available from this advanced imaging technology, the EverFocus eZ.HD Series EHD935F uses a vari-focal lens together with 1/2.9"... -
Page 6: Cable Description
EHD935F eZ.HD Vandal Dome Camera D-WDR to improve the visibility under high contrast scene 3D-Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio images even under low light environments Weather resistant IP67 and built-in heater ... -
Page 7: Installation
EHD935F eZ.HD Vandal Dome Camera 3. Installation 3.1 Installation and Adjustment For Ceiling Mount / Wall Mount users: Stick the Template Plate on the position where you want to attach the camera, drill four holes on the Template Plate for screwing the Adapter Plate with the supplied Screws and Plastic Anchors. - Page 8 EHD935F eZ.HD Vandal Dome Camera Remove the Adapter Plate from the camera, and screw the Adapter Plate to the wall / ceiling with supplied Screws, then put the camera back to the Adapter Plate. If you want to wire the cable through the side of the camera, follow the steps below: a.
- Page 9 EHD935F eZ.HD Vandal Dome Camera Use the supplied Rubber Plate to fix the cable and then tightly push the Rubber Plate to the Cable Conduit tightly. 5. You can optionally mount the camera using an L-Shaped Mounting Bracket.
- Page 10 EHD935F eZ.HD Vandal Dome Camera Connect the camera to an AHD DVR with the 12VDC or 24VAC power source using the supplied DC Power Pigtail Cable or a power adapter. Using the Test Lead for viewing the video image while adjusting camera angles. You can also use the OSD Menu Joystick to configure camera settings.
- Page 11 EHD935F eZ.HD Vandal Dome Camera • Push the Joystick up / down to select among menu items. • Push the Joystick left/ right to adjust the level of the selected item. • Press the Joystick to enter the submenu or exit the OSD Setup Menu. Note: The function button is using to control direction, and also to switch video format and video output.
- Page 12 EHD935F eZ.HD Vandal Dome Camera 9. Tear apart the outer packing( figure 1 ) to take out the Desiccant Bag ( figure 2 ), then make it folded ( figure 3 ) and put it into the camera housing( figure 4 ). Note: It’s recommended to close the cover cap immediately in case of reducing the absorption capacity of the Desiccant Bag inside the camera .
-
Page 13: Configuration In The Osd Menu
EHD935F eZ.HD Vandal Dome Camera 4. Configuration in the OSD Menu You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD menu. For details on the OSD menu structure as below: No. - Page 14 EHD935F eZ.HD Vandal Dome Camera Level Middle, High, Low Area Position, Size,↑,↓,→,← Default Select Area1, Area2, Area3, Area4 Display Position, Size,↑,↓,→,← Black Mask On/Off HSBLC Level 0-100 All Day Model Night AGC Level 0-255 Default AWC→SET Indoor White Outdoor Balance Blue 1-500 Manual...
- Page 15 EHD935F eZ.HD Vandal Dome Camera Mirror Off, Mirror, V-flip, Rotate Neg. Image Off/On Select Area1,Area2,Area3,Area4 Position, Size,↑,↓,→,← Display Sensitiv 0-100 Color Green, Blue, White, Red Motion 1.00,0.75,0.50, Trans 0.25 View Type Off, Block, Outline, All OSD View On/Off Alarm Alarm Out On/Off Time 1-15...
- Page 16 EHD935F eZ.HD Vandal Dome Camera x2, x4, x6, x8,x10, x15, x20, Sens-up x25, x30 Pos/Siz Position, Size,↑,↓,→,← Black DPC Start Press Enter DPC View Off/On Level 0-255 CAM ID 0-255 RS485 ID Display Off/On Baud Rate 2400,4800,9600,19200 ,38400 Level 0-10 Sharpness Auto Start AGC...
-
Page 17: Specifications
EHD935F eZ.HD Vandal Dome Camera 5. Specifications EHD935F Pickup Device 1/2.9" SONY 2.24M pixels CMOS Video Format NTSC and PAL( can be switched via OSD) Effective Pixels 1920 (H)*1080 (V) Scanning System Progressive Scan Sensitivity 0 lux with IR on S/N Ratio Over48 dB (AGC OFF) Electronic Shutter... - Page 18 FAX: +81 3 5625 8189 www.everfocus.com www.everfocus.co.jp sales@everfocus.com info@everfocus.co.jp Ihr EverFocus Produkt wurde Your EverFocus product is designed and manufactured with high quality entwickelt und hergestellt mit qualitativ hochwertigen Materialien materials and components which can be recycled and reused. und Komponenten, die recycelt und wieder verwendet werden können.