Saeco D.A. 5P Instruction And Maintenance Manual page 50

English
The upper line of the display will always show the selected drink,
while the second line shows the settable parameters from time to
time.
B E V E R A G E A B E V E R A G E A B E V E R A G E A
B E V E R A G E A B E V E R A G E A
S E Q U E N C E : S E Q U E N C E : S E Q U E N C E : S E Q U E N C E : S E Q U E N C E : 1 0 0 0 1 0 0 0 1 0 0 0 1 0 0 0 1 0 0 0
This item allows the setting of the sequence with which the prod-
ucts composing the drink shall be prepared and dispensed (in this
case A). Up to four beverages may be inserted.
To change the value, which varies between 0, 1 and C, follow the
procedure described in chapter "7.5 Changing and saving pa-
rameters".
Important
In this function the digit 0 corresponds to no product, as a
consequence the digit combination corresponding to " 0100 "
or " 1000 " or " 0010 " will always provide for the dispensing
of product 1.
Depending on the sequence, it will be asked to set the parameters
relating to the products that shall be dispensed in the drink.
Press the "UP" and "DOWN" keys to scroll the drink composition.
B E V E R A G E A B E V E R A G E A B E V E R A G E A
B E V E R A G E A B E V E R A G E A
S O L U B L E 1 : S O L U B L E 1 : S O L U B L E 1 : S O L U B L E 1 : S O L U B L E 1 :
(Only D.A. 5P)
It defines the quantity of soluble product to be mixed with water.
The lower line shows "SOLUBLE 1:045".
045 indicates that 45 units of soluble product will be used.
To modify the soluble product quantity follow the procedure de-
scribed in chapter "7.5 Changing and saving parameters".
Important
The quantity of soluble powder may be adjusted from 0 to
250 with 1-by-1 steps.
The product is not dispensed when the parameters are set on
" 0000 ".
B E V E R A G E A B E V E R A G E A
B E V E R A G E A B E V E R A G E A B E V E R A G E A
W A T E R 1 : W A T E R 1 : 0 3 0 0 3 0
W A T E R 1 : W A T E R 1 : W A T E R 1 : 0 3 0 0 3 0 0 3 0
It defines the quantity of water to be mixed with the soluble pow-
der or coffee.
When "WATER 1:030" appears on the lower line, this means
that water will be mixed with the soluble product or with coffee.
030 means that 30 water units will be dispensed in the soluble
product or in coffee.
To modify the water quantity follow the procedure described in
chapter "7.5 Changing and saving parameters".
Important
The quantity of hot water may be adjusted from 0 to 250 with
1-by-1 steps.
The product is not dispensed when the parameters are set on
" 0000 ".
18
0 4 5 0 4 5 0 4 5 0 4 5 0 4 5
B E V E R A G E A B E V E R A G E A B E V E R A G E A B E V E R A G E A B E V E R A G E A
% S O L U B . 1 : % S O L U B . 1 :
% S O L U B . 1 : % S O L U B . 1 : % S O L U B . 1 :
It indicates the speed with which soluble powder and water are
dispensed in drink A.
Important
By setting the value on 10 the pump works at maximum flow
rate, while the soluble product is dispensed by impulses at
minimum flow rate.
By setting the value on 100 both the soluble product and water
are dispensed at maximum flow rate.
By setting 190 the pump works by impulses at minimum flow
rate, while the soluble product is dispensed at maximum flow
rate.
To change the dispensing speed follow the procedure described
in chapter "7.5 Changing and saving parameters".
Important
Soluble powder and hot water may be adjusted between 10
and 190, with 10-by-10 steps.
B E V E R A G E A B E V E R A G E A B E V E R A G E A
B E V E R A G E A B E V E R A G E A
C O F F E E : C O F F E E : C O F F E E : C O F F E E : C O F F E E : 0 5 0 0 5 0 0 5 0 0 5 0 0 5 0
It defines the quantity of coffee to be dispensed.
The lower line shows "COFFEE: 050".
050 means that 50 ground coffee units obtained with ground
coffee shall be dispensed.
To change the coffee quantity follow the procedure described in
chapter "7.5 Changing and saving parameters".
Important
The quantity of dispensable coffee may be adjusted from 0 to
500 with 2-by-2 steps.
The product is not dispensed when the parameter is set on
" 0000 ".
Example of a drink with one soluble product and
coffee.
B E V E R A G E C B E V E R A G E C
B E V E R A G E C B E V E R A G E C B E V E R A G E C
S E Q U E N C E : S E Q U E N C E : S E Q U E N C E : C 1 0 0 C 1 0 0
S E Q U E N C E : S E Q U E N C E : C 1 0 0
The letter "C", displayed in the first line indicates the drink corre-
sponding to the C key (upper third in the keypad - ref. 3, fig. 17).
The four digits indicate the products (coffee and/or soluble prod-
uct) shall be used to compose the drink.
In this example drink dispensing, selectable with the C key, shall
be obtained by mixing water, coffee and soluble product.
N.B.: the same drink may be obtained with the same products,
set in different sequence (e.g. C001, or 0C01, etc.).
Pressing the "DOWN" key moves the display to the next item.
1 6 0 1 6 0
1 6 0 1 6 0 1 6 0
C 1 0 0
C 1 0 0