Saeco D.A. 5P Instruction And Maintenance Manual page 36

English
1 - MANUAL
OVERVIEW
1.1 Introduction
Important
This publication is an integral part of the vending machine
and should be read carefully. It contains the technical infor-
mation required for proper installation, maintenance and
operation of the D.A. 3P and 5P with clock module. Always
refer to this publication before performing any operation.
Figures show the model D.A. 5P, but can also be referred to
the model D.A. 3P without substantial differences.
Manufacturer: Cosmec S.p.A.
Via Panigali, 39 - 40041 GAGGIO MONTANO (Bo)
In the internal part of the cover you will find the page with the
illustration most frequently referred to by the text. Keep it open
while you read the publication.
This publication should be kept with care and must accompany
the machine during the whole of its operating life, including own-
ership changes.
In case this publication is lost or damaged, immediately ask an
AUTHORIZED SERVICE CENTRE for a new copy.
• The Manufacturer owns all the copyrights of this publication.
1.2 Used symbols
Various types of indications were used in this publication with the
purpose of underlining the various danger or competency levels.
As a complement to the symbol a message is reported explaining
procedures and giving useful information:
Danger
It's used to underline dangerous situations for both the vend-
ing machine operators and the machine itself.
Maintenance technician
It's used to mark out the operations that should be performed
only by specialized personnel.
Important
It's used to mark out the operations that ensure good vending
machine operation if performed.
4
2 - MACHINE
INFORMATION
2.1 User information
• The vending machine is programmable as for the doses of any
type of vend.
• The vending machine is pre-set to accommodate the PARALLEL
12V coiner and the mechanic token coiner.
• The vending machine is pre-set for the insertion of an addition-
al function (CLOCK MODULE) that allows start up or shutdown
programming.
• In case of need refer to the national Importer or Distributor or to
the Manufacturer if the Importer is not available.
• AUTHORIZED SERVICE CENTRES are available for any clari-
fication or information concerning vending machine operation,
or to satisfy spare part supply or technical assistance demands.
• The manufacturer reserves the right to carry out improvements
to the vending machine without prior notice.
2.2 Vending machine intended use
The vending machine D.A. 5P is capable of dispensing in a com-
pletely automatic and programmable way:
- espresso coffee prepared with instantly ground bean coffee;
- drinks based on soluble lyophilized products (chocolate, milk,
tea, etc.)
- hot water for the preparation of hot drinks
The vending machine D.A. 3P is capable of dispensing in a com-
pletely automatic and programmable way:
- espresso coffee prepared with instantly ground bean coffee;
- hot water for the preparation of hot drinks.
Important
In case of improper use any form of warranty shall decay
and the manufacturer shall disclaim all responsibilities for
damages to people and/or objects.
The following shall be considered improper uses:
- any use other than the one provided for and/or with tech-
niques different from the ones described in this publication;
- any intervention on the vending machine in contrast with the
procedures described in this publication;
- any use after component tampering and/or after changes to
the safety devices;
- Installing the device outdoors