Saeco D.A. 5P Instruction And Maintenance Manual page 56

Automatic drink vending machine
Hide thumbs Also See for D.A. 5P:
Table of Contents

Advertisement

Available languages

Available languages

English
Warning
This operation is required for vending machine installation
and bypasses the safety system provided for in case of door
opening. It should therefore be performed by specialized
personnel that are conscious of the risks involved in working
on live devices.
fig. 23
-
Keep the button pressed (ref. 26, fig. 1) until a steady water
jet is coming out of the dispensing tube (ref. 18, fig. 1).
-
Remove the micro-switch bypassing key.(ref. 30, fig. 23).
-
Close the door.
-
Wait for the flashing red light to go off.
If the red light stays on and the display indicates "PLEASE
WAIT", this means that the machine didn't reach the proper
temperature.
-
Read the vending machine dialogue message on the display
(ref. 1, fig. 1) and perform the possibly indicated operations.
-
Wait for the display to indicate "INSERT COIN".
-
Place the cup in the dispensing slot.
Important
Drinks should be dispensed only in open containers (glasses,
cups, etc.).
-
Insert the credit corresponding to the type of drink.
-
Press the corresponding button.
24
The dispensed products should be consumed rapidly, and
shouldn't be stored and/or packaged.
-
Check proper machine operation by dispensing some drinks.
Although all the buttons are originally programmed on stand-
31
ard values, it's necessary to check that the obtained drink has
the desired characteristics. In case it hasn't, it's necessary to
proceed in programming the dispensing buttons (see "7 –
30
Programming).
Token/coin box
Access to the coin box requires (ref. 15, fig. 1):
-
Opening the lock (ref. A, fig. 24) with the special key.
fig. 24
-
Extracting.
-
Remove the cover (ref. B, fig. 24).
-
Empty it from the contained coins/tokens.
-
Reinsert it in its seat (fig. 24).
8.6
Vending machine operation is completely or partially blocked when
some products are missing or faulty conditions occur. The display
(ref. 1, fig. 1) on the control panel indicates the reasons that caused
the possible block, together with the red light (ref. 2, fig. 1) turned
on.
Important
Important
A
Display messages
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D.a. 3p

Table of Contents