Saeco D.A. 5P Instruction And Maintenance Manual page 39

5 - COMMAND AND
INSTRUMENT
DESCRIPTION
Important
The vending machine is delivered with the dispensing keys
already programmed on standard values.
Main switch (ref. 28, fig. 5)
it's located in the lower right back side of the vending ma-
chine.
On the "I" position it turns the vending machine on (enabling
electric functions)
On the "O" position it turns the vending machine off (disables
electric functions)
28
fig. 5
Keypad D.A. 5P (ref. 3, fig. 6)
It's composed of 5 re-programmable keys that when pressed
control the dispensing of the same number of drinks, identified
from top to bottom as A - B - C - D - E (ref. 3, fig. 6).
The correspondence between key and dispensed drink is at
the User's discretion.
The A - B - C - D keys (ref. 3, fig. 6) are also used to perform
programming.
(refer to "7 - Programming")
Keypad D.A. 3P (ref. 3, fig. 6)
It's composed of 3 re-programmable keys that when pressed
control the dispensing of the same number of drinks, identified
from top to bottom as A - B - C.
The correspondence between key and dispensed drink is at
the User's discretion.
The A - B - C keys (ref. 3, fig. 6) are also used to perform
programming.
(refer to "7 - Programming")
Display (ref. 1, fig. 6)
It's composed of 2 lines with 16 characters each, and has the
duty of displaying the messages relating to the operations (in
progress or to be performed) and the possible out-of-service
conditions.
fig. 6
Red indicator light (ref. 2, fig. 6)
When the light is on it indicates that the vending machine is
not ready for drink dispensing.
In any case the display (ref. 1, fig. 6) supplies the indications
on vending machine operative or out-of-service status.
Reset key (ref. 6, fig. 7)
It's located on the internal part of the door and may perform
the following functions:
a) Resetting "OUT OF SERVICE" (out –of-service) indica-
tions (refer to " Display messages ").
b) Water circuit filling (refer to " 6.2 Water connection").
6
fig. 7
English
1
2
A
B
C
3
D
E
7