Faculty Test; Function Test <(6) Function Test - Canon mf6600 Series Service Manual

Left/right arrow key
<
>

Faculty Test

■ Function Test <(6) FUNCTION TEST>
Function test ((6) FUNCTION TEST)
Press the numeric keypad key 6 on the test mode menu to select the function test.
Press numeric keypad keys 1 and 3 to 9 during the function test to enter the menus listed
below.
Keypad
Item
1 G3 signal transmission test Transmits 4800-bps G3 signals to a telephone line and
speaker.
2 Not used
3 Sensor test Sensor actuation test
4 ADF test ADF operation test
Host machine operation test
5 Book test
6 Speaker test Speaker operation test
LCD, LED and control key operation test
7 Operation panel test
Lamp test
8 Contact sensor illumination test
Line signal reception test NCU board signal sensor and frequency counter operation
9
test
8
Service Mode > Test Mode (Test) > Faculty Test > Function Test <(6) FUNCTION TEST>
Transmission speed
2400bps
4800bps
7200bps
9600bps
12000bps
14400bps
16800bps
19200bps
21600bps
24000bps
26400bps
28800bps
31200bps
33600bps
T-8-49 T-8-49
Explanation
8 Service Mode > Test Mode (Test) > Faculty Test > Function Test <(6) FUNCTION TEST>
G3 signal transmission test (6-1: G3 4800 bps Tx)
Press numeric keypad key 1 on the FUNCTION TEST menu to select the G3 signal
transmission test. This test transmits 4800-bps G3 signals from the telephone line
connection terminal and speaker.
Sensor test (6-3: SENSOR)
This mode is used to verify the status of the unit sensors from LCD indications. Press
numeric keypad key 3 on the FUNCTION TEST menu to select the sensor test. LCD
indications change as the associated sensors turn on and off.
T-8-50 T-8-50
6-3:SENOR
[1] - [8]
Press '1' on the numeric pad.
CRG ON FCV ON
ALS [of of of ]
CRG:Toner cartridge sensor: on/of
FCV:Toner cartridge cover: on/of
ALS:Multi-purpass paper sensor/Paper width sensor
/Delivery sensor: on/of
Press '2' on the numeric pad.
PW of PW2 of
PW:Paper leading edge sensor: on/of
PW2:Delivery paper width sensor: on/of
Press '3' on the numeric pad.
DS of DES of HPS of
DS:Document sensor: on/of
DES:Document edge sensor: on/of
HPS:CS HP sensor: on/of
Press '4' on the numeric pad.
TN Volue xxx
USB memory of
xxx:Toner voltage
USB memory:Detection: on/of
F-8-12 F-8-12
8-32
8-32