4
Disassembly/Assembly > Controller System > Removing the Engine Controller Unit (TYPE I) > Procedure
2) Remove the Harness [1] from the 2 Harness Guide [2].
6 Connectors [3]
•
x6
x2
3) Remove the Feed Guide [1].
1 Screw [2]
•
4
Disassembly/Assembly > Controller System > Removing the Engine Controller Unit (TYPE I) > Procedure
[2]
[1]
[3]
F-4-140
[2]
[1]
F-4-141
4) Remove the 8 Connectors [1] and the Terminal [2].
x9
[1]
5) Remove the Harness [1] from the Harness Guide [2].
1 Connector [3]
•
[3]
[1]
[2]
4-65
[1]
[2]
[1]
F-4-142
F-4-143
4-65