Removing The Upper Cover Unit; Preparations; Procedure - Canon mf6600 Series Service Manual

4
Disassembly/Assembly > External Cover, Internal Cover > Removing the Upper Cover Unit > Procedure
CAUTION :
Procedure at installation
1) Fit the 2 Upper Claw [2] of the Rear Cover Unit [1] With the Upper Cover Unit.
2) Open the Sub Output Tray [3] and While Pushing the Duplex Reverse Sensor Flag [4]
Downward, Install the Rear Cover Unit.
[1]
[4]
[3]
3) Check That the Sensor Flag [2] Protrudes Through the Hole [1] of the Guide Unit On
the Back of the Duplex Unit Cover.
[2]
[1]
4 Disassembly/Assembly > External Cover, Internal Cover > Removing the Upper Cover Unit > Procedure
[2]
F-4-44 F-4-44
F-4-45 F-4-45

Removing the Upper Cover Unit

■

Preparations

1) Removing the Right Cover.(Refer to page 4-23)
2) Removing the Left Cover.(Refer to page 4-19)
3) Removing the Controller Cover.(Refer to page 4-55)
4) Removing the Left Rear Cover.(Refer to page 4-22)
5) Removing the ADF + the Reader Unit.(Refer to page 4-33)
■

Procedure

1) Remove the Upper Cover Unit [1].
3 Screws [2]
•
1 Screw [3] (Loosen)
•
2 Claws [4]
•
[3]
[1] [4]
x4
x2
[2]
\
4-28
[2]
[2]
F-4-46 F-4-46
4-28