4
Disassembly/Assembly > Controller System > Removing the Control Panel
Removing the Control Panel
1) Open the ADF Unit + Reader Unit [1].
2) Release the claw [1], and remove the Arm Cover [2].
[1]
[2]
4
Disassembly/Assembly > Controller System > Removing the Control Panel
[1]
F-4-158
F-4-159
3) Release the Connection of Arm [1] and turn it toward the rear.
[1]
4) Remove the 2 Blanking Sheets [1] and 4 Screws [2] On the Bottom Of the Reader Unit.
CAUTION:
Since the Blanking Sheet [1] Needs to be Purchased Separately, be Careful Not to Lose
it After Removing It.
x4
[2]
4-70
F-4-160
[2]
[1]
F-4-161
4-70