4
Disassembly/Assembly > Fixing System > Removing the Fixing Unit > Procedure (TYPE II)
■
Procedure (TYPE II)
CAUTION:
When Removing the Fixing Unit, Perform the Operation After the Fixing Unit is Surely
Cooled.
The Fixing Unit Just After Printing May Cause Burn Injury.
1) Close the Front Cover and Move the Gear In the Position Where It Can Be Removed.
2) Remove the 3 Gears [1].
[1]
4
Disassembly/Assembly > Fixing System > Removing the Fixing Unit > Procedure (TYPE II)
[1]
F-4-242
CAUTION:
Points to Note at Installation
Fit the Protrusion [2] of the Gear (21T) [1] With the Cut-off of the Gear [3] and Install
•
it.
Fit the Cut-off [4] of the Gear (21T) [1] With the Teeth of the Fan Gear [5] and Install
•
it.
[1]
4-101
[3]
[2]
[1]
[4]
[5]
F-4-243
4-101