Removing The Control Panel Assembly; Removing The Multi Pickup Assembly - Canon imageRUNNER 2545 Series Service Manual

4
Parts Replacement and Cleaning > Main Units/Parts > Removing the Multi Pickup Assembly
3) Place a sheet of paper that the user usually uses on the platen glass, enter the service
mode, and then select SCAN > READER > FUNCTION > CCD > DFWLVL3.
Read the white level in the BOOK mode. (Check the transparency of the glass for BOOK
mode.)
4) Place a sheet of paper that the user usually uses on the DF, enter the service mode, and
then select SCAN > READER > FUNCTION > CCD > DF-WLVL4.
Read the white level in the DF mode (stream reading). (Check the transparency of the
glass for stream reading.)(Read both sides of the chart.)

Removing the Control Panel Assembly

1) Remove the reader front cover.("Removing the Reader Front Cover"(page
2) Remove the control panel assembly.
• 2 screw
• 1 connector
x2
x1
4 Parts Replacement and Cleaning > Main Units/Parts > Removing the Multi Pickup Assembly

Removing the Multi Pickup Assembly

1) Open the right cover assembly.
2) Remove the link between the right cover and pickup assembly.
4-14).)
F-4-71
4-35
F-4-72
4-35