Section 3: Setup; Unpacking; Needed For Setup; Inventory - Grizzly G0783 Owner's Manual

11" slow speed cold cut saw
Table of Contents

Advertisement

Unpacking

This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this machine.
Description
Additional People ....................................... 2
Safety Glasses (Per Person) ...................... 1
Cleaner/Degreaser (Page 13) .... As Needed
Disposable Shop Rags ............... As Needed
Lifting Straps (Rated Min. 500 lbs.) ............ 2
Screwdriver Flat Head #2 ........................... 1
Open-End Wrench
Open-End Wrench 12mm ........................... 1
-12-

SECTION 3: SETUP

Qty
" ................................ 1
7
8

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Small Item Inventory (Figure 5)
A. Lever Arm w/Hex Nut M22-2.5 ................... 1
B. Eye Bolts 28mm, M12-1.75 x 22 ................. 4
C. Miter Lock Lever Cap ................................. 1
D. Vise Handwheel Handles ........................... 4
E. Flat Washer 22mm ..................................... 1
A
Figure 5. G0783 inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Qty
B
C
D
E
G0783 (Mfd. Since 05/15)

Advertisement

Table of Contents
loading

Table of Contents