Grizzly G0783 Owner's Manual page 23

3.
Rotate retractable blade guard and linkage
out of the way, as shown in Figure 21.
4. Remove arbor cap screw (see Figure 21). It
features left-hand threads and loosens when
turned clockwise.
Arbor Cap
Screw
Figure 21. Linkage undone to expose blade.
5.
Remove blade and blade flange (see
Figure 22).
Blade Flange
Arbor Cap Screw
Figure 22. Blade and flange removed.
G0783 (Mfd. Since 05/15)
Retractable
Blade Guards
Blade
6.
Align and place blade flange on new blade,
as shown in Figure 23.
Figure 23. Installing blade flange onto new
blade.
7.
Align flange pins with holes in saw arbor, and
install using hex wrench (see Figure 24).
Blade Guard Linkage
Arbor Cap Screw
Figure 24. Tightening blade.
8. Lower blade guard, and reconnect blade
guard linkage with cap screws removed in
Step 2.
Tighten
-21-