System Mode Buttons; Run Artis Se; Update Software; Update - Kurzweil Artis SE Musician's Manual

System Mode (Boot Loader)

System Mode Buttons

System Mode Buttons
The navigation buttons perform the following functions in System Mode:

Run Artis SE

This is the first System Mode menu item. Pressing the
Artis SE will start up as if you just switched on the unit (except for the
message that happens when you first start up the unit).

Update Software

Update Software has two parameters: Update and Restore. Select Update to install a new OS
and Objects version, or select Restore to the install the previous OS version. The new OS and
Object files are combined in one file (.KUF).

Update

1. Obtain the Update file from the Kurzweil website or another reliable source and save it
in a known folder or directory on your computer.
2. Connect the Artis SE (powered off) to your computer with a USB cable.
11-2
CAUTION: THE SYSTEM RESET AND FILE UTILITIES
OPERATIONS BOTH ERASE ALL USER OBJECTS..
Exit
+
Param/Channel ▲
Param/Channel ▼
Use the Exit button to return to the previous menu.
Similar to a "cancel" button.
+
Use the button to confirm a selection and move into
sub-menu, if any. It functions like an "OK" button.
Use the Param/Channel ▲ button to select the next
menu item, menu item parameter or read Diagnostic test
messages.
Use the Param/Channel ▼ button to select the previous
menu item, menu item parameter or read Diagnostic test
messages.
+
button will load the OS and the