Store - Kurzweil Artis SE Musician's Manual

Storage Mode
NOTE: Selecting PC for the Device option will disconnect any MIDI device connected via
USB. If the Artis SE is currently connected to your computer via USB as a MIDI device,
you may want to close any MIDI applications connected to the Artis SE in order to avoid
problems when MIDI is disconnected.

Store?

Store?
The
connected to the unit via USB. After selecting a device with the Device option, connect a
USB cable or USB device to a USB port on the Artis SE's rear panel.
With the
message "Save file to [device]?". Press the
files to the selected device (USB or PC). If the device is not attached or not recognized, the
display will prompt you to connect the selected device or unplug and reconnect it. Follow
the instructions on the display.
When the device has been recognized, the display shows the default file name for all objects
( ALLOBJTS
the Alpha Wheel to select alphanumeric characters.
Press the Save button or the Assign button to store your user objects to the selected
device (or press Exit to cancel). The display will show the "
confirmation. If you are storing to a PC, you must copy the saved file from the Artis SE
virtual drive to your computer before continuing.
If an error occurs during the save operation, then the display will show the error message,
Save Error
10-2
option allows you to save every User Program and User Multi to a device
Store?
option selected, press the
). You can edit this before saving, using the
Save file with NAME
ALLOBJTS
Save Successful
Press [Assign] Key
.
+
button and the display will show the
+
button again to start the process of saving the
+
button to move the cursor, and
Saving... " message then a