Program Demo; Demo; Panic; Assign - Kurzweil Artis SE Musician's Manual

Features of the Artis SE
Double Button Presses

Program Demo

In Program Mode only, pressing the 3 & 4 Program/Multi buttons performs the Program
Demo Function. The Program Demo Function plays the Demo Song for the currently
selected Program. Press the Exit button to exit the Program Demo at any time.
If you press these buttons from any other Mode, the display will give you a message
indicating you are not in Program Mode.

Demo

Pressing the 5 & 6 Program/Multi buttons performs the Demo Function (described in
further detail in Program and Song Demo Functions on page 5-3). With the Demo Function
selected, you can hear a demonstration song that showcases many of the features of Artis SE.

Panic

Pressing the 7 & 8 Program/Multi buttons simultaneously deactivates all sounding notes and
control messages and sends an "all notes off" message and an "all controllers off" message on
all 16 MIDI channels.

Assign

Pressing a key, switch, or moving a controller while holding down the Assign assign performs
"Intuitive Entry."
Assign + Zone (1–4) Button
In Multi Edit Mode, holding the Assign button and pressing a Multi Zone Mute button will
jump to selecting that Zone. The currently selected Zone number can be seen on the top line
of the page.
3-14