Getting Started; Before You Start; Quick Start - Kurzweil Artis SE Musician's Manual

Chapter 2

Getting Started

Getting a new keyboard is always exciting and the first thing most users want to do is unpack
the keyboard and check things out. This chapter will help you hook up the Artis SE to your
sound system and MIDI system, give you a quick overview, and show you how to get some
sound out of the Artis SE.

Before You Start...

Don't connect anything until you make sure the Artis SE is properly and safely situated.
If your Artis SE keyboard has been out in the cold, give it time to warm up to room
temperature before starting it, since condensation may have formed inside.

Quick Start

1. Set the keyboard on a hard, flat, level surface.
2. Four adhesive-backed rubber feet are provided with Artis SE. Carefully turn the keyboard
over onto a soft surface, remove the paper backing from the rubber feet and attach them.
NOTE : Unless the instrument will always be used with a
keyboard stand, attachment of the rubber feet is strongly
advised. Otherwise protruding screws will scratch the tabletop
and may increase the key action sound.
Getting Started
Before You Start...
2-1