Power On - Olympus E-5 Instruction Manual

Power on

1
Set the camera's power switch to ON
• To turn off the power, set the power switch to OFF.
LIGHT button
Turns the control panel light on
and off.
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device's filter surface.
Adjusting the viewfinder's
diopter
Adjust the viewfinder's diopter in
accordance with your vision.
While looking through the viewfinder,
rotate the diopter adjustment dial little by
little.
When you can see the AF target clearly,
adjustment is complete.
Control panel
Lit up (ready for use)
Lit up (battery power is low)
Blinks (charging required)
ON
OFF
Power switch
Diopter adjustment dial
When the camera is
turned on, the battery
check is displayed on
the control panel.
Viewfinder
AF target
13
EN