Attaching A Lens To The Camera - Olympus E-5 Instruction Manual

Attaching a lens to the camera

1
Remove the body cap from the camera
and the rear cap from the lens
2
Attach a lens to the camera
• Align the lens attachment mark (red)
on the camera with the alignment
mark (red) on the lens, then insert the
lens into the camera's body (1).
• Rotate the lens in the direction
indicated by the arrow until you hear it
click (2).
• Make sure the power switch is
set to OFF.
• Do not press the lens release
button.
3
Remove the lens cap
( , )
3 4
Removing the lens from the
camera
While pressing the lens release button
(1), rotate the lens in the direction of
the arrow (2).
• Make sure the power switch is
set to OFF.
Rear cap
2
1
Alignment mark (Red)
3
4
3
2
1
2
Body cap
Lens attachment
mark (Red)
2
1
Lens cap
1
Lens release button
11
EN