Image Overlay - Olympus E-5 Instruction Manual

Image overlay

Up to 4 frames of RAW images taken with the camera can be overlaid and saved as a
separate image. The image is saved with the record mode set at the time the image is saved.
1
MENU [q] [EDIT] [IMAGE OVERLAY]
• Selection is also possible during playback by pressing the i button.
2
Select the number of frames to overlay and press the i button.
3
Use p to select a frame and press the i button.
• Repeatedly select images only for the number of frames
selected in Step 2.
• To cancel your selection, press the i button again.
4
Use bd to select an image, then use ac to
select the gain for each image. Press the i
button.
• Select from 0.1 to 2.0.
• The displayed image changes as the gain is adjusted.
5
Use ac to select [YES], then press the i
button.
TIPS
To overlay 5 or more frames:
j To overlay 5 or more frames, save the overlay image as a RAW file and use [IMAGE OVERLAY]
repeatedly.
x
Notes
• When the record mode is set to [RAW], the overlay image is saved as [YN+RAW].
• When the picture mode is set to [] to [], the overlay image is saved with
[jNATURAL].
IMAGE OVERLAY
RAW RAW RAW RAW
RAW RAW
RAW RAW RAW RAW
BACK SET
IMAGE OVERLAY
x 0.3 x 0.3 x 0.3 x 0.3 x 0.1 x 0.1
BACK SET
RAW RAW
RAW RAW
x 0.1 x 0.1
7
95
EN