Olympus E-5 Instruction Manual page 57

Direct button
• When the button is released, the currently selected AF
target lights. When M or N is set, you can select the
AF target to be used at that point. For operation, refer to
Step 2 in "Selecting the AF target position" (gP. 57)
in the next section.
Super control panel
• When M or N is set, you can turn the dial to select
the AF target.
Menu
• When M or N is set, you can select the AF target with p.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the P button and release your finger to enable selection of the AF target.
2
Use the main dial/sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac, and use the sub dial to perform the same
operation as bd.
• Press the i button to return the position of the AF target
to the center.
TIPS
Selecting the operation when the AF target is selected:
j You can change the operation of the dials and arrow pad for selecting the AF target.
g"P SET UP" (P. 102)
Selecting the position of the AF target with the arrow pad without pressing the P
button:
j Press the shutter button halfway and release it, then use the arrow pad to change the position of
the AF target. g"BUTTON FUNCTION" (P. 106)
Performing AF with the specified point:
j You can perform AF with the position and size of the enlargement frame.
g"Enlarged display operation" (P. 40)
x
Notes
• While shooting using live view, the dynamic-single target AF mode cannot be used.
P + j/k
i p: [AF AREA]
P + k
MENU [c] [R] [AF AREA]
k
P button
AF button
i button
MENU button
j
3
57
EN