Olympus E-5 Instruction Manual

Olympus E-5 Instruction Manual

Olympus digital camera user manual
Hide thumbs Also See for E-5:
Table of Contents

Advertisement

DIGITAL CAMERA
INSTRUCTION
MANUAL
Thank you for purchasing an Olympus digital camera. Before you start to use your
new camera, please read these instructions carefully to enjoy optimum performance
and a longer service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before
taking important photographs.
The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
The contents in this manual are based on firmware version 1.0 for this camera. If there
are addition and/or modification of functions due to firmware update for the camera,
the contents will differ. For the latest information, please visit the Olympus website.
Basic guide
Review the camera part names,
the basic steps for shooting and
playback, and the basic operations.
Table of Contents P. 23
P. 2

Advertisement

Table of Contents
loading

Summary of Contents for Olympus E-5

  • Page 1 INSTRUCTION MANUAL Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.
  • Page 2: Names Of Parts And Functions

    Camera Hot shoe gP. 78, 82 Built-in flash gP. 76 LIGHT button gP. 13 Control panel gP. 5 WB (White balance) button gP. 67 F (Exposure compensation) button gP. 47 ISO button gP. 50 Shutter button gP. 15, 36 Sub dial ( gP.
  • Page 3 Eyecup Viewfinder gP. 4 LCD monitor gP. 7, 8, 36 Eyepiece shutter lever gP. 60 Diopter adjustment dial gP. 13 MENU button gP. 22 INFO (Information display) button gP. 21, 40, 89 Tripod socket Illumination sensor gP. 99 q (Playback) button gP.
  • Page 4: Viewfinder

    Viewfinder Aperture value gP. 41-45 Shutter speed gP. 41-45 Super FP flash gP. 79 Metering mode gP. 46 AF target gP. 56 Shooting mode gP. 41-45 White balance (Displayed when set Auto bracket to a setting other than gP. 49, 51, 69, 77 auto white balance.) gP.
  • Page 5: Control Panel

    Control panel AF mode gP. 53 Auto bracket gP. 49, 51, 69, 77 ISO sensitivity gP. 50 Shooting mode gP. 41-45 Flash mode gP. 73 Shutter speed gP. 41-45 Sequential shooting gP. 59 Self-timer gP. 60 Aperture value gP. 41-45 Remote control gP.
  • Page 6: Super Control Panel

    Super control panel The following screen allows the display and setting of shooting settings at the same time and is called the super control panel. Press the INFO button to display the super control panel on the LCD monitor. g“Setting while looking at the super control panel” (P. 21) MYSET gP.
  • Page 7: Lcd Monitor (Live View)

    LCD monitor (Live view) You can use the LCD monitor to view the subject while shooting. Press the u button to use live view. g“Using live view” (P. 35) Card gP. 136 Super FP flash s gP. 79 RC mode q gP. 80 Battery check Auto bracket t gP.
  • Page 8: Lcd Monitor (Playback)

    LCD monitor (Playback) You can switch the monitor display using the INFO button. g“Information display” (P. 89) Battery check gP. 13 Pixel count, compression rate gP. 64 Protect gP. 97 Print reservation Number of prints gP. 121 Aspect border gP. 65 2010.09.01 21:56 2010.09.01 21:56...
  • Page 9: Preparations For Shooting

    If anything is missing or damaged, contact the dealer from whom you purchased the camera. Camera Body cap BCM-5 Lithium ion USB cable charger • OLYMPUS Setup CD-ROM • Instruction manual • Warranty card Attaching the strap Thread the strap as indicated by the arrows (1, 2).
  • Page 10: Preparing The Battery

    Preparing the battery Charging the battery Remove the protection cap from the battery. Amber light : Charging in progress : Charging completed (Charging time: Approx. 3.5 hours) Amber blinking: Charging error Loading the battery Close the battery compartment cover and slide the battery compartment lock in the direction of E Unloading the battery...
  • Page 11: Attaching A Lens To The Camera

    Attaching a lens to the camera Remove the body cap from the camera and the rear cap from the lens Attach a lens to the camera • Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body (1).
  • Page 12: Loading The Card

    Loading the card Compact Flash Open the card cover (1, 2). Insert the CF card (referred to as instructions) into the slot as far as it can go (3). Card cover Card access lamp CF card slot Removing the card Compact Flash •...
  • Page 13: Power On

    Power on Set the camera’s power switch to ON • To turn off the power, set the power switch to OFF. LIGHT button Turns the control panel light on and off. Dust reduction function operation The dust reduction function is automatically activated when the camera is turned on. Ultrasonic vibrations are used to remove dust and dirt from the image pickup device’s filter surface.
  • Page 14: Date Format

    Setting the date/time Date and time information is recorded on the card together with the images. The file name is also included with the date and time information. Be sure to set the correct date and time before using the camera. Press the MENU button •...
  • Page 15: Shooting

    Shooting Place the AF target on the subject while viewing through the viewfinder Adjust the focus Press the shutter button halfway. Viewfinder AF confirmation mark • The focus is locked when a beep tone is output. The AF confirmation mark and the AF target in focus light up in the viewfinder.
  • Page 16: Holding The Camera

    Holding the camera Keep your fingers and the strap away from the lens, flash, and the white balance sensor. Taking a picture while viewing the monitor Press the u (live view) button to switch to live view • The subject is displayed on the LCD monitor.
  • Page 17 Recording a movie Press the u (live view) button to switch to live view • The subject is displayed on the LCD monitor. Adjust the focus • Press the shutter button halfway. Press the n button to begin recording • Press the n button again to end recording. •...
  • Page 18: Playback/Erasing

    Playback/Erasing Playing back images Close-up playback Erasing images Pressing the q button displays the last picture taken. q button Displays the previous frame Arrow pad Use k to forward the frames. Each time you turn the main dial towards U, the image is incrementally enlarged from 2×...
  • Page 19: Basic Operations

    Basic operations There are three basic ways to operate this camera. Using the direct buttons to operate the camera gP. 20 You can make the function settings with the main dial or sub dial and the direct buttons assigned to a function.
  • Page 20: Using The Direct Buttons To Operate The Camera

    Using the direct buttons to operate the camera There are two ways to use the direct buttons. While holding down a direct button, turn the main dial or sub dial • Release the button to set the function. After pressing one or two buttons at the same time, turn the main dial or sub dial •...
  • Page 21: Setting While Looking At The Super Control Panel

    Setting while looking at the super control panel Press the INFO button to display the super control panel • Press the INFO button again to turn off the super control panel. • During live view, the live control is displayed. g“Using the live control to operate the camera”...
  • Page 22: Setting On The Menu

    Setting on the menu Press the MENU button to display the menu CARD SETUP RESET/MYSET PICTURE MODE IMAGE ASPECT Operation guide BACK Press the MENU button to go back one screen Use ac to select a tab, then press d Shooting menu 1 Shooting menu 2 q Playback menu...
  • Page 23: Table Of Contents

    Table of Contents Basic guide Identifies the camera part names and describes the basic steps for shooting and playback. Names of parts and functions ...2 Camera...2 Viewfinder...4 Control panel ...5 Super control panel ...6 LCD monitor (Live view) ...7 LCD monitor (Playback) ...8 Preparations for shooting ...9 Unpack the box contents...9 Preparing the battery...10...
  • Page 24 Exposure Describes functions related to exposure, which is important for shooting. These functions are for determining the aperture value, shutter speed, and other settings by measuring the brightness in the picture. Program shooting ... 41 Aperture priority shooting ... 42 Shutter priority shooting...
  • Page 25 Built-in flash shooting ...76 Flash intensity control ...76 Flash bracketing ...77 External flash shooting ...78 Shooting with the Olympus wireless RC flash system...80 Using commercially available flashes ...82 Recording and viewing movies Describes movie recording method and functions. Recording movies ...83 Changing the movie record mode ...84...
  • Page 26 REC VIEW ... 99 cMENU DISPLAY ... 99 FIRMWARE... 100 RESET/MYSET ... 100 Setting MYSET... 100 Resetting the settings... 101 Customizing your camera Describes how to customize the camera’s settings. R AF/MF ... 102 AF AREA... 102 P SET UP... 102 RESET LENS...
  • Page 27 4 h TIMER (Auto power off)...111 PICTURE MODE SETTINGS...111 V EXP/e/ISO ...111 EV STEP ...111 METERING ...111 AELMetering...111 ISO STEP...111 ISO-AUTO SET ...111 ISO-AUTO ...112 BULB TIMER...112 ANTI-SHOCK z ...112 W # CUSTOM ...112 #X-SYNC..112 #SLOW LIMIT ...112 w+F ...112 X K/ASPECT/COLOR/WB ...113 NOISE REDUCT.
  • Page 28 Describes how to transfer and store your camera images to a computer. Windows... 127 Macintosh... 128 Import and store the image without OLYMPUS Viewer 2 or [ib]... 129 Shooting tips and maintenance Refer to this section for troubleshooting and camera maintenance information.
  • Page 29 Record mode and file size/number of storable still pictures ...144 Functions that can be registered with MYSET setting ...145 Menu directory ...146 Specifications ...153 SAFETY PRECAUTIONS...156 Index ...163...
  • Page 30: Quick Reference

    Quick reference Shooting Correct focus cannot be obtained Focusing on one area Taking pictures of nearby subjects Taking pictures while checking the results Extending the useful life of the battery Increasing the number of pictures that can be taken Select the AF target and take the picture. The minimum shooting distance varies depending on the lens.
  • Page 31 Taking pictures in low light Increase the ISO sensitivity. situations without using Set the image stabilizer function. the flash Setting the camera to fire the flash automatically in Set the flash setting to [AUTO]. low light situations Take a picture while checking the histogram and Highlight&Shadow.
  • Page 32 Taking pictures so that whites come out white and blacks come out black Taking pictures without noise Making the viewfinder easier to view Optimizing the LCD monitor Reducing camera shake Taking pictures while checking the level of the camera Taking a picture using the art filter Recording a movie Set the spot metering for highlight or shadow control.
  • Page 33 Playback Displaying the image after Set [REC VIEW]. You can set the number of seconds the picture is taken that the image is displayed. Set [REC VIEW] to [AUTO q]. After you take a picture, Displaying the image after the picture is taken and the camera switches to playback mode automatically, deleting unneeded images allowing you to delete the image.
  • Page 34 Indications used in this manual The operation button icons on the body of the camera are used to indicate the operation buttons in this manual. See “Names of parts and functions” (gP. 2). In this manual, j indicates the main dial on the back of the camera. In this manual, k indicates the sub dial on the front of the camera.
  • Page 35: Activating Live View

    Using live view Activating live view It is possible to use the LCD monitor as a viewfinder. You can view the exposure or white balance effect and the subject’s composition while you take the picture. Close the eyepiece shutter so the light entering through the viewfinder does not affect the exposure while shooting with live view.
  • Page 36: Taking A Picture Using Live View

    Taking a picture using live view Press the shutter button halfway. • When the focus is locked, the AF confirmation mark and AF target mark light up. • When using a lens other than a high-speed Imager AF compatible lens, the n focus confirmation may not light up.
  • Page 37: Using The Live Control To Operate The Camera

    Using the live control to operate the camera The following screen which simultaneously displays shooting setting functions and associated options is called the live control. You can display and use it by pressing i button during live view. You can set the art filter, the white balance and other effects while checking live view.
  • Page 38: Using The Face Detection Function

    Using the face detection function By setting [g FACE DETECT] to [ON], the camera will detect people’s faces in the frame and adjust the focus and metering automatically. Set the AF target to B and the metering mode to e. Assign [Fn FACE DETECT] to the Fn button to easily set to the best settings for taking pictures of people.
  • Page 39: Switching The Information Display

    Switching the information display You can switch the information displayed on the monitor by pressing INFO button repeatedly. You can also switch the information displayed by turning the dial while pressing the INFO button. Information display on INFO INFO + 1023 1023 1023...
  • Page 40: Taking A Picture While Comparing The Effect

    Taking a picture while comparing the effect You can check the effect of exposure compensation or white balance on a 4-split screen. Press the INFO button repeatedly to display the multi view display. g“Switching the information display” (P. 39) • The exposure compensation comparison screen is displayed.
  • Page 41: Exposure

    Exposure Program shooting The camera sets the optimum aperture value and shutter speed automatically according to the subject brightness. While holding down the MODE button, turn the main dial to set the shooting mode to P. • When the shutter button is half-pressed, the shutter speed and aperture value are displayed on the viewfinder and control panel.
  • Page 42: Aperture Priority Shooting

    Aperture priority shooting The camera sets the optimum shutter speed automatically for the aperture value you have selected. When you open the aperture (decrease the aperture value), the camera will focus within a shorter range (shallow depth of field) and produce a picture with a blurred background.
  • Page 43: Shutter Priority Shooting

    Shutter priority shooting The camera sets the optimum aperture value automatically for the shutter speed you have selected. Set the shutter speed depending on the type of effect you want. A higher shutter speed allows you to capture a fast-moving subject without blur, and a slower shutter speed blurs a moving subject, creating a feeling of speed or motion.
  • Page 44: Manual Shooting

    Manual shooting Allows you to set the aperture and shutter speed manually. You can check how much it differs from the appropriate exposure by using the exposure level indicator. This mode gives you more creative control, allowing you to make whatever settings you like, regardless of the correct exposure.
  • Page 45: Bulb Shooting

    TIPS The picture looks blurred: j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed. j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera shake by using the image stabilizer.
  • Page 46: Preview Function

    Preview function The viewfinder shows the focused area (depth of field) with the selected aperture value. Press the  (Preview) button to use the preview function. Changing the metering mode There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted averaging metering, and 3 types of spot metering.
  • Page 47: Exposure Compensation

    H Center weighted averaging metering This metering mode provides the average metering between the subject and the background lighting, placing more weight on the subject at the center. Use this mode when you do not want the light level of the background to affect the exposure value. I Spot metering The camera meters a very small area around the center of the subject, defined by the spot metering area mark in the viewfinder.
  • Page 48: Ae Lock

    • The exposure compensation indicator is displayed. The exposure compensation indicator will not be displayed when the exposure is compensated by 0. When set to 1/3 EV increments • If the exposure compensation value exceeds the scale of the exposure compensation indicator, the indicator will blink in the viewfinder and on the control panel.
  • Page 49: Ae Bracketing

    TIPS To lock the exposure only while pressing the AEL/AFL button: g“AEL/AFL MEMO” (P. 106) If you find it difficult to press the AEL/AFL button and shutter button at the same time: j You can switch the functions of the AEL/AFL button and the < button. g“A”...
  • Page 50: Iso Sensitivity Setting

    Start shooting. • In single-frame shooting, the exposure changes every time the shutter button is pressed. • In sequential shooting, hold down the shutter button until the selected number of frames are taken. • Releasing the shutter button stops flash bracketing shooting. When it stops, 0 blinks in the viewfinder and on the control panel and 0 is displayed in green on the super control panel.
  • Page 51: Iso Bracketing

    Display after setting Viewfinder When set to [AUTO], ISO-A and the ISO value determined by the camera are displayed. For all other settings, ISO and the set value are displayed. When set to 3200 or a higher value, ISO blinks. TIPS To automatically set the optimal ISO in M mode: j Normally, the AUTO setting is not available in M mode, but you can set it for use in all shooting...
  • Page 52 IMAGE OVERLAY In playback mode, up to 4 frames of RAW images can be overlaid and saved as a single image. g“Image overlay” (P. 95) Menu Setting display • When multiple exposure is set, u is displayed on the control panel and super control panel. When shooting is interrupted, u blinks and i is displayed in green on the super control panel.
  • Page 53: Focusing And Shooting Functions

    Focusing and shooting functions AF mode selection The three focus modes S-AF, C-AF, and MF are available with this camera. You can take pictures by combining S-AF or C-AF mode with MF mode. Direct button Super control panel Setting display Viewfinder S-AF C-AF...
  • Page 54: C-Af (Continuous Af)

    TIPS When it is difficult to focus in the AF mode in low-light conditions: j The built-in flash can function as an AF illuminator. This makes focusing easier in low-light conditions using AF mode. g“AF ILLUMINAT. (AF Illuminator)” (P. 103) When you want to quickly switch from AF mode to MF: [MF] By registering...
  • Page 55: Simultaneous Use Of S-Af Mode And Mf Mode (S-Af+Mf)

    TIPS To change the rotational direction of the focus ring: j You can select the rotational direction of the focus ring to suit your preference for how the lens adjusts to the focusing point. g“FOCUS RING” (P. 103) For information on whether the subject is in focus (Focus aid): j When you focus the lens on a subject manually (by turning the focus ring), the AF confirmation mark lights.
  • Page 56: Af Target Selection

    AF target selection This camera has 11 AF targets for focusing on the subject with auto focus. Select the optimal AF target mode according to your subject and the composition. There are two AF target modes: All target AF mode, which uses AF at all AF targets, and Single target AF mode, which uses AF centering around one selected AF target.
  • Page 57 P + j/k Direct button • When the button is released, the currently selected AF target lights. When M or N is set, you can select the AF target to be used at that point. For operation, refer to Step 2 in “Selecting the AF target position” (gP. 57) in the next section.
  • Page 58: Registering An Af Target Mode

    Registering an AF target mode You can register a frequently used AF target mode and the position of that AF target. You can then quickly load that registered setting (“home position”) and use it when shooting. Menu Registering Select the position of the AF target and press the i button.
  • Page 59: Sequential Shooting

    Sequential shooting Single-frame shooting o Sequential shooting H l Sequential shooting L O • Press the shutter button fully and keep it pressed. The camera will take pictures in sequence until you release the button. • Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).
  • Page 60: Self-Timer Shooting

    Self-timer shooting This function lets you take pictures using the self-timer. You can set the camera to release the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting. For the setting method, see “Sequential shooting” (gP. 59). Press the shutter button all the way.
  • Page 61 Transmitted signal effective area Point the remote control at the remote control receiver of the camera within the effective area as shown below. When powerful lighting such as direct sunlight is shining on the remote control receiver, or when fluorescent light or devices emitting electrical or radio waves are nearby, it could narrow the effective area.
  • Page 62: Anti-Shock

    Anti-shock You can select the interval from the time the mirror is raised until the shutter is released. This diminishes camera shake caused by vibrations when the mirror moves. This feature can be useful in astrophotography and microscope photography or other photographic situations where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.
  • Page 63 Without this initialization, the image stabilizer may not be able to achieve the proper effect. • If the image stabilizer icon blinks in red on the monitor, it indicates a failure of the image stabilizer function. If you take a picture as is, the composition may be off. Consult your Olympus Authorized Service Center.
  • Page 64: Record Mode, White Balance, And Picture Mode

    This is unprocessed data that has not undergone changes in white balance, sharpness, contrast or color. To display as an image on the computer, use OLYMPUS Viewer 2 or [ib] software. RAW data cannot be displayed on a different camera or by using common software, and it cannot be selected for print reservation.
  • Page 65: Selecting The Record Mode

    Selecting the record mode JPEG For JPEG, you can register 4 combinations of images sizes (Y, X, W) and compression rates (SF, F, N, B) from the 12 total combinations available. g“K SET” (P. 114) When you select the X or W image size, you can further select the pixel size. g“PIXEL COUNT”...
  • Page 66: Selecting The White Balance

    TIPS To change the aspect ratio of recorded images: j You can only change the aspect ratio when the aspect ratio of the image is set to [4:3]. g“Editing still images” (P. 93) To trim recorded images: j You can only trim images when the aspect ratio of the image is set to [4:3]. g“Editing still images”...
  • Page 67: Setting The Auto/Preset/Custom White Balance

    Setting the auto/preset/custom white balance WB + j/k Direct button i p: [WB] Super control panel • Custom white balance is set by selecting [CWB] and turning the dial while pressing down the F button. MENU [c] [X] [WB] Menu Setting display Viewfinder Color temperature...
  • Page 68: Wb Compensation

    WB compensation This function lets you make fine changes to the auto WB, preset WB settings and the one- touch WB. Direct button • Use the sub dial to set in the A direction or the main dial to set in the G direction. Super control panel Menu •...
  • Page 69: Setting The One-Touch White Balance

    TIPS Checking the white balance you have adjusted: j After setting the compensation value, point the camera at the subject to take test shots. When the AEL/AFL button is pressed, sample images that have been taken with the current WB settings are displayed.
  • Page 70: Picture Mode

    Setting display When using the direct button Viewfinder • Select from [OFF], [3F 2STEP], [3F 4STEP], or [3F 6STEP] for the EV step for both the A-B (amber-blue) direction and the G-M (green-magenta) direction. • When the shutter button is pressed down all the way, 3 images adjusted in specified color directions are automatically created.
  • Page 71 [hi-ENHANCE] : Produces more impressive-looking pictures matched to the scene mode. [iVIVID] : Produces vivid colors. [jNATURAL] : Produces natural colors. [ZMUTED] : Produces flat tones. [cPORTRAIT] : Produces beautiful skin tones. [MONOTONE] : Produces black and white tone. [CUSTOM] : Select one picture mode, set the parameters, and register the setting.
  • Page 72: Noise Reduction

    Notes • [POP ART] to [DRAMATIC TONE] are not applied to RAW images. • If the record mode is set to [RAW] and [POP ART] to [DRAMATIC TONE] are applied, the record mode is automatically set to [YN+RAW]. • The grainy appearance of the picture may be emphasized when [POP ART] to [DRAMATIC TONE] are applied.
  • Page 73: Flash Shooting

    Flash shooting Flash mode setting The camera sets the flash mode according to various factors such as firing pattern and flash timing. Available flash modes depend on the exposure mode. The flash modes are available to optional external flashes. Auto flash AUTO The flash fires automatically in low light or backlight conditions.
  • Page 74: Flash Off

    Slow synchronization (2nd curtain) #SLOW2 2nd curtain flash fires just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out. In S/M/BULB mode, the flash always fires.
  • Page 75 Manual flash This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set the f-number on the lens based on the distance to the subject. Ratio of amount of light ISO 200 (Equivalent to ISO 100) FULL (1/1) 1/16 1/64...
  • Page 76: Built-In Flash Shooting

    Notes • When [#RC MODE] is set to [ON], the built-in flash will fire only to communicate with the external flash so it will not function as a flash. g“Shooting with the Olympus wireless RC flash system” (P. 80) Flash intensity control The flash intensity can be adjusted from +3 to -3.
  • Page 77: Flash Bracketing

    w + k Direct button i p: [w] Super control panel Setting display Viewfinder TIPS To adjust the flash using only the dials: j Assign the flash intensity control function to the main dial (or sub dial). g“DIAL FUNCTION” (P. 104) Notes •...
  • Page 78: External Flash Shooting

    External flash shooting In addition to the camera’s built-in flash capabilities, you can use any of the external flash units specified for use with this camera. This enables you to take advantage of a wider variety of flash shooting techniques to suit different shooting conditions. The external flashes communicate with the camera, allowing you to control the camera’s flash modes with various available flash control modes, such as TTL-AUTO and Super FP flash.
  • Page 79 Turn on the flash. • When the charge lamp on the flash lights up, charging is complete. • The flash will be synchronized with the camera at a speed of 1/250 sec. or less. Select a flash mode. Select the flash control mode. •...
  • Page 80: Shooting With The Olympus Wireless Rc Flash System

    Shooting with the Olympus wireless RC flash system Wireless flash shooting is possible with the Olympus wireless RC flash system. With this wireless flash system, you can take pictures using multiple wireless flashes and control the flashes in three groups (A, B, and C). The built-in flash is used to communicate between the camera and the external flashes.
  • Page 81 Use the super control panel to set the flash mode and other settings for each group. Group • Select the flash A MODE control mode and adjust the flash intensity individually for groups A, B, and C. For MANUAL, select the flash intensity.
  • Page 82: Using Commercially Available Flashes

    Using commercially available flashes You cannot use the camera to adjust the amount of light emitted from a commercially available flash except for a flash specified for use with this camera. To use a commercially available flash, connect it to the hot shoe or connect the synchronization cord to the external flash connector.
  • Page 83: Recording And Viewing Movies

    Recording and viewing movies During live view, use the n(movie) button to record High Definition (HD) movies with sound.g“Shooting” (P. 15) Recording movies Activate live view. • Press the u button when shooting the pictures using the view finder. Set to the desired shooting mode. •...
  • Page 84: Changing The Movie Record Mode

    • The size of each movie file is limited to 2GB. With some types of card to be used, recording may be interrupted unexpectedly before reaching the end of available recording time. • When the inside of the camera becomes hot, shooting is automatically stopped to protect the camera.
  • Page 85: Viewing Movies

    Viewing movies Display a movie in single-frame playback and press the ibutton. Select [MOVIE PLAY] using ac and press the i button to begin playback. • The following operations can be performed during movie playback. Pause or resume playback. • While playback is paused, press a to display the first frame and press c to display the last frame.
  • Page 86: Playback Functions

    Playback functions Single-frame/Close-up playback The basic procedure for viewing pictures are as shown below. However, before using any of these functions, follow Step 1 below. You can set the camera to automatically switch to single-frame playback mode after shooting. g“REC VIEW” (P. 99) Press the q button (Single-frame playback).
  • Page 87: Light Box Display

    Light box display You can view the playback image and another image together on the left and right sides of the monitor. This is useful if you want to compare images you recorded using bracketing. Press the P button during single-frame playback.
  • Page 88: Index Display/Calendar Display

    Index display/Calendar display This function lets you show several images on the monitor at the same time. This is useful when you want to quickly search a number of pictures to find a particular image. During single-frame playback, each time you turn the dial toward G, the number of images shown changes between 4, 9, 25 and 100 pictures.
  • Page 89: Information Display

    Information display This allows you to display detailed information about the image. Luminance information can also be displayed with histogram and highlight graphs. Press the INFO button repeatedly until the desired information is displayed. You can also switch the information displayed by turning the dial while pressing the INFO button.
  • Page 90: Slideshow

    Slideshow This function displays images stored on the card one after another. The images are played back in order, starting with the displayed image. MENU [q] [m] • Press the i button during playback to select slideshow. BACK Perform slideshow settings. [START] : Perform slideshow using current settings.
  • Page 91: Rotating Images

    Rotating images This function lets you rotate images and display them vertically on the monitor during single- frame playback. This is useful when taking pictures with the camera held vertically. The images will automatically be displayed in the correct direction even if the camera is rotated. MENU [q] [y] •...
  • Page 92 Notes • To connect the camera to a TV, use the provided AV cable. • Make sure that the camera’s video output signal type is the same as the TV’s video signal type. g“VIDEO OUT” (P. 108) • The camera’s monitor turns off automatically when the AV cable is connected to the camera. •...
  • Page 93: Editing Still Images

    Using the TV remote control The camera can be operated by a TV remote control when connected to a TV that supports HDMI control. MENU [c] [U] [HDMI] [HDMI CONTROL] • Set to [ON]. Operate the camera by using the TV remote control. •...
  • Page 94 MENU [q] [EDIT] [SEL. IMAGE (Select Image)] • Selection is also possible during playback by pressing the i button. Use bd to select an image, then press the i button. • The camera recognizes the image data format. • For images recorded in JPEG+RAW, a selection screen will appear, asking you which data to edit.
  • Page 95: Image Overlay

    Image overlay Up to 4 frames of RAW images taken with the camera can be overlaid and saved as a separate image. The image is saved with the record mode set at the time the image is saved. MENU [q] [EDIT] [IMAGE OVERLAY] •...
  • Page 96: Copying Images

    Copying images This function lets you copy images to and from the SD card and CompactFlash. This menu can be selected if both cards are inserted. The selected card is the copying source. g“r/ ” (P. 116) Single-frame copy Play back the image you want to copy and press the COPY/<...
  • Page 97: Protecting Images

    Protecting images Protect images you do not want to erase. Protected images cannot be erased by the single- frame or all-frame erase function. Single-frame protect Play back the image you want to protect and press the 0 button. • 9 (protect mark) is displayed on the top right corner of the screen.
  • Page 98: Erasing Images

    Erasing images Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card; or selected frame erase, which erases only the frames selected. Notes •...
  • Page 99: Setup Functions

    Setup functions Setup Menu Use the Setup Menu to set the basic camera functions. For details on using the menu lists, see “Setting on the menu” (gP. 22). X (Date/time setting) W (Changing the display language) You can change the language used for the on-screen display and error messages from ENGLISH to another language.
  • Page 100: Firmware

    FIRMWARE Your product’s firmware version will be displayed. When you make inquiries about your camera or accessories or when you want to download software, you will need to state which version of each of the products you are using. RESET/MYSET Setting MYSET You can register the current camera setting condition as up to 4 MYSETs.
  • Page 101: Resetting The Settings

    Changing each setting to MYSET setting while remaining the current shooting mode MENU [W] [RESET/MYSET] Menu 1) Select between [MYSET1] to [MYSET4] and press the i button. 2) Use acto select [YES], then press the i button. • Each setting is set to the MYSET setting excluding some items such as P/S/A/M. For details on the functions that cannot be changed, refer to “Functions that can be registered with MYSET setting”...
  • Page 102: Customizing Your Camera

    Customizing your camera Use the Custom Menu to customize the shooting functions. Custom Menu has 10 tabs (R to ) that are divided according to the functions to be set. AF/MF BUTTON/DIAL RELEASE/j DISP/8/PC EXP/e/ISO For details on using the menu lists, see “Setting on the menu” (gP. 22). Custom Menu R AF/MF AF AREA Select the AF target mode.
  • Page 103: Focus Ring

    It is not applied for the mechanically-focus lenses such as Olympus SWD lenses. MF ASSIST Set it to [ON] to automatically enlarge the subject on the monitor by rotating the focus ring while shooting in [S-AF+MF] or [MF] with live view.
  • Page 104: S Button/Dial

    Custom Menu S BUTTON/DIAL DIAL FUNCTION In P, A, S, or M mode, you can assign functions other than the default functions to the main dial and sub dial. You can also switch the operations of the main dial and sub dial for menu and playback operations with the default operations.
  • Page 105: Ael/Afl

    AEL/AFL You can use the AEL/AFL button to perform AF or metering operations instead of using the shutter button. Select the function of the button to match the operation when the shutter button is pressed. Select [mode1] to [mode4] in each focus mode. (You can only select [mode4] in C-AF mode.) Shutter button function Mode...
  • Page 106: Ael/Afl Memo

    AEL/AFL MEMO You can lock and maintain the exposure by pressing the AEL/AFL button. Press the AEL/AFL button to lock and maintain the exposure. Press again to [ON] cancel the maintaining of the exposure. The exposure will be locked only while the AEL/AFL button is pressed. [OFF] BUTTON FUNCTION You can assign the following functions to each button;...
  • Page 107: Button Timer

    Function You can switch the shooting mode to [Y/X] by [Y/X] pressing the button. (Underwater wide/ Press and hold the button to return to the previous Underwater macro) shooting mode. Press the button to display the level gauge in the viewfinder and on the control panel, and press it [LEVEL GAUGE] again to hide the level gauge display.
  • Page 108: T Release/J

    T RELEASE/j Custom Menu RLS PRIORITY S/RLS PRIORITY C Normally, this camera does not release the shutter while the AF is operating or the flash is charging. If you want to release the shutter without waiting until these operations have completed, use the setting below.
  • Page 109: Live View Boost

    LIVE VIEW BOOST During live view shooting, you can brighten the monitor for easier confirmation on the subject. [OFF] The subject is displayed on the monitor with the brightness level that is adjusted according to the exposure being set. You can shoot while confirming through the monitor in advance to get a picture that is to your liking.
  • Page 110: Usb Mode

    The selection screen for the USB connection will be displayed every time you connect the cable to a computer or printer. [STORAGE] Allows you to transfer images to a computer. Also, select to use the OLYMPUS Viewer 2 / [ib] software via PC connection. [MTP] Allows you to transfer images to a computer running Windows Vista without using the OLYMPUS Viewer 2 / [ib] software.
  • Page 111: Timer (Auto Power Off)

    TIPS To calibrate the level gauge: j g“LEVEL ADJUST” (P. 120) To easily turn on and off the level gauge: j By registering [LEVEL GAUGE] to the < button, P button or  (preview) button, you can press the that button to display or hide the level gauge. g“BUTTON FUNCTION” (P. 106) Notes •...
  • Page 112: Iso-Auto

    ISO-AUTO You can set the shooting mode in which the ISO [AUTO] setting is activated. [P/A/S] The [AUTO] setting is activated in all shooting modes except M and BULB mode. When [AUTO] is selected in M mode, ISO 200 is set. [ALL] The [AUTO] setting is activated for other than BULB mode.
  • Page 113: K/Aspect/Color/Wb

    Custom Menu X K/ASPECT/COLOR/WB NOISE REDUCT. (Noise Reduction) This function reduces the noise that is generated during long exposures. When shooting night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE REDUCT.], you can let the camera reduce noise automatically to produce clearer images. When set to [AUTO], noise reduction will be activated only when the shutter speed is slow.
  • Page 114: Color Space

    COLOR SPACE You can select how colors are reproduced on the monitor or printer. The first character in image file names indicates the current color space. g“FILE NAME” (P. 116) Pmdd0000.jpg P : sRGB _ : Adobe RGB SHADING COMP. In some cases, the edges of the image may be shadowed due to the properties of the lens.
  • Page 115: Aspect Shooting

    ASPECT SHOOTING When the aspect ratio for shooting is set to a setting other than [4:3], select whether the setting is effective only when taking pictures using live view, or anytime when taking pictures using the viewfinder or live view. [LV] The setting is only effective when taking pictures using live view.
  • Page 116: File Name

    FILE NAME When you take a picture, the camera assigns it a unique file name and saves it in a folder. File names are assigned as shown in the illustration below. [AUTO] Even when a new card is inserted, the folder numbers are retained from the previous card.
  • Page 117: Copyright Settings

    COPYRIGHT SETTINGS You can add the artist/copyright name that are set in advance to the image as Exif data. For the artist name and the copyright name, you can enter up to 63 single-byte characters. • If you edit the image, the names of the artist and the copyright are taken over to the created file.
  • Page 118: Af Focus Adj

    AF FOCUS ADJ. You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (–: closer, +: toward )). Normally, there is no need to change this. [SET AF DATA] Fine-adjust the AF default value and register the setting. You can also register the setting according to the lens.
  • Page 119: Aa Battery Type

    To compare the difference in adjustment values: j You can use light box display to compare adjustment values. The adjustment values are also displayed during light box display. g“Light box display” (P. 87) To register two types of adjustment values (with the focal point of the lens in front of and behind the subject): j You can register multiple adjustment values for the same lens.
  • Page 120: Warning Level

     WARNING LEVEL You can change the timing when change this. Notes • The battery check display is not a warning that the battery needs to be charged. When blinks, charge the battery. g“Power on” (P. 13) LEVEL ADJUST You can calibrate the level gauge if you feel that the gauge is not level. [RESET] Resets to the factory default adjustment value.
  • Page 121: Printing

    Printing Print reservation (DPOF) Print reservation Print reservation allows you to save printing data (the number of prints and the date/time information) with the pictures stored on the card. Pictures set with print reservation can be printed using the following methods. DPOF (Digital Print Order Format) This is for saving desired print settings on digital cameras.
  • Page 122: All-Frame Reservation

    Press bd to select the frame that you want to set as print reservation, then press ca to set the number of prints. • To set print reservation for several pictures, repeat this step. Press the i button when you have finished. •...
  • Page 123: Resetting The Print Reservation Data

    Resetting the print reservation data You can reset all print reservation data or just the data for selected pictures. MENU [q] [<] Resetting the print reservation data for all pictures Select [<] or [U] and press the i button. Select [RESET] and press the i button. Resetting the print reservation data for a selected picture Select [<] and press the i button.
  • Page 124: Connecting The Camera To A Printer

    Connecting the camera to a printer Use the provided USB cable to connect the camera to a PictBridge-compatible printer. Turn the printer on and connect the camera's USB terminal to the printer's USB port with the USB cable. • For details on how to turn the printer on and the position of the USB port, refer to the printer’s manual.
  • Page 125: Custom Printing

    Custom printing Follow the operation guide to set a print option. Selecting the print mode Select the type of printing (print mode). The available print modes are as shown below. [PRINT] Prints selected pictures. [ALL PRINT] Prints all the pictures stored in the card and makes one print for each picture.
  • Page 126 Setting printing data Select whether to print printing data such as the date and time or file name on the picture when printing. When the print mode is set to [ALL PRINT] and [OPTION SET] is selected, the following screen appears. [<×] Sets the number of prints.
  • Page 127: Using The Olympus Viewer 2 / [Ib]

    • If the “Setup” dialog is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the CD-ROM (OLYMPUS Setup) icon to open the “OLYMPUS Setup” window and then double-click “Launcher.exe”. • If a “User Account Control” dialog is displayed, click “Yes” or “Continue”.
  • Page 128: Macintosh

    Install OLYMPUS Viewer 2 and [ib] computer software. • Check the system requirements before beginning installation. • Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” button and follow the on-screen instructions to install the software. OLYMPUS Viewer 2 Operating System...
  • Page 129: Import And Store The Image Without Olympus Viewer 2 Or [Ib]

    *Other languages can be selected from the language combo box. For information on using the software, see online help. Import and store the image without OLYMPUS Viewer 2 or [ib] Your camera supports the USB Mass Storage Class.You can transfer images to a computer by connecting the camera to the computer with the provided USB cable.
  • Page 130: Shooting Tips And Maintenance

    Shooting tips and maintenance Shooting tips and information The camera does not turn on even when a battery is loaded The battery is not fully charged • Charge the battery with the charger. The battery is temporarily unable to function because of the cold •...
  • Page 131 [PD AFL] to [ON] in the Custom Menu allows to use the phase difference AF during live view by pressing AFL/AEL button g“PD AFL” (P. 103). For the information about the high-speed Imager AF-compatible lens, visit the Olympus website.
  • Page 132: Error Codes

    Error codes Control Viewfinder panel indications indications Normal indication No indication No indication No indication No indication No indication No indication Monitor Possible cause indication The card is not inserted, or it cannot be NO CARD recognized. There is a problem with the card.
  • Page 133 Control Viewfinder panel indications indications No indication No indication No indication No indication Internal camera No indication No indication too high. Please wait for cooling No indication No indication No indication No indication CONNECTION No indication No indication No indication No indication No indication No indication Monitor Possible cause...
  • Page 134: Camera Maintenance

    Control Viewfinder panel indications indications No indication No indication No indication No indication No indication No indication Camera maintenance Cleaning and storing the camera Cleaning the camera Turn off the camera and remove the battery before cleaning the camera. Exterior: •...
  • Page 135: Cleaning Mode K Removing Dust

    If dust or dirt gets on the image pickup device, black dots may appear in the picture. Contact your Olympus Authorized Service Center to have the image pickup device physically cleaned. The image pickup device is a precision device and is easily damaged. When cleaning the image pickup device yourself, be sure to follow the instructions below.
  • Page 136: Information

    Information Card basics Usable cards “Card” in this manual refers to a recording medium. This camera can use CompactFlash or SD Card, SDHC card and the SDXC card (commercially available). CompactFlash (Type I) (UDMA-compatible) A CompactFlash is a large-capacity solid state flash memory card.
  • Page 137: Battery And Charger

    Battery and charger Use the single Olympus lithium-ion battery (BLM-5). Do not use other than Olympus genuine battery. The BLM-1 can be used, however be sure to use the dedicated charger (BCM-1 or BCM-2) when charging it. We recommend using BLM-5.
  • Page 138: Interchangeable Lenses

    • The Micro Four Thirds lens cannot be used. FOUR THIRDS mount Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new interchangeable lenses featuring the Four Thirds mount were developed from the ground up based on optic engineering exclusively for digital cameras.
  • Page 139: Zuiko Digital Lens Specifications

    ZUIKO DIGITAL lens specifications Names of parts 1 Hood mount section 2 Filter mount thread 3 Zoom ring 4 Focus ring 5 Mount index 6 Electrical contacts 7 Front cap 8 Rear cap 9 Lens hood Attaching the hood • Use the hood when shooting a backlit subject. Main Specifications Items Mount...
  • Page 140: Program Line Diagram (P Mode)

    Can be used with the optional EX-25 extension tube under the following conditions. The focus adjustment when EX-25 is used will be MF. Lens, focal length 14 mm 14-54 mm F2.8-3.5 II 54 mm ED 12-60mm 12 mm F2.8-4.0 60 mm Storage Precautions •...
  • Page 141: Flash Synchronization And Shutter Speed

    Flash synchronization and shutter speed Shooting mode Flash timing 1/ (lens focal length × 2) or synchronization timing, whichever is slower The set shutter speed *1 Can be changed using menu: 1/60 - 1/250 g“#X-SYNC.” (P. 112) *2 Can be changed using menu: 30 - 1/250 g“#SLOW LIMIT” (P. 112) Exposure warning display If the optimum exposure cannot be obtained when pressing the shutter button halfway, the display will blink in the viewfinder and on the super control panel.
  • Page 142: Flash Modes That Can Be Set By Shooting Mode

    Flash modes that can be set by shooting mode Shooting Viewfinder mode indications *1 When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal flash before emitting light. g“Super FP flash” (P. 79) Super Control panel control...
  • Page 143: White Balance Color Temperature

    Shooting Viewfinder Control panel mode indications indications (BULB) White balance color temperature The higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the color temperature, the richer the light in reddish tones and the poorer in bluish.
  • Page 144: Record Mode And File Size/Number Of Storable Still Pictures

    Record mode and file size/number of storable still pictures The file size in the table is approximate for files with a 4:3 aspect ratio. Record Number of pixels mode (PIXEL COUNT) 4032 × 3024 3200 × 2400 2560 × 1920 1600 ×...
  • Page 145: Functions That Can Be Registered With Myset Setting

    Functions that can be registered with MYSET setting Function Shooting mode Aperture value Shutter speed IMAGE STABILIZER (I.S.) / < Y/ j STILL PICTURE MOVIE IMAGE ASPECT NOISE REDUCT. NOISE FILTER METERING EXPOSURE SHIFT #RC MODE AF MODE AF AREA PSET HOME AF AREA POINTER C-AF LOCK...
  • Page 146: Menu Directory

    Function REC VIEW SLEEP BACKLIT LCD 4 h TIMER BUTTON TIMER Program shift : Can be registered. k: Cannot be registered. Menu directory Shooting Menu Function CARD SETUP RESET/MYSET PICTURE MODE IMAGE ASPECT * Factory default setting MYSET Function registration dpi SETTING USB MODE COLOR SPACE...
  • Page 147: Playback Menu

    Function IMAGE STABILIZER BRACKETING MULTIPLE EXPOSURE #RC MODE * Factory default setting Playback Menu Function EDIT < COPY ALL RESET PROTECT * Factory default setting Setting OFF/I.S. 1*/I.S. 2/I.S. 3 /2F 0.3EV/2F 0.5EV/2F 0.7EV/2F 1.0EV/ 3F 0.3EV/3F 0.5EV/3F 0.7EV/3F 1.0EV/5F AE BKT 0.3EV/5F 0.5EV/5F 0.7EV/5F 1.0EV/7F 0.3EV/ 7F 0.5EV/7F 0.7EV...
  • Page 148 Custom Menu Function AF/MF AF AREA PSET UP RESET LENS BULB FOCUSING FOCUS RING MF ASSIST PSET HOME PD AFL AF ILLUMINAT. C-AF LOCK AF AREA POINTER AF SENSITIVITY BUTTON/DIAL DIAL FUNCTION DIAL DIRECTION AEL/AFL AEL/AFL MEMO BUTTON FUNCTION * Factory default setting Setting B*/M/N OFF/LOOP/SPIRAL*...
  • Page 149 Function BUTTON FUNCTION BUTTON TIMER RELEASE RLS PRIORITY S RLS PRIORITY C Ofps DISP/8/PC HDMI VIDEO OUT SLEEP LIVE VIEW BOOST gFACE DETECT G/INFO SETTINGS KCONTROL SETTINGS * Factory default setting *1Settings differ depending on the region where the camera is purchased. Setting AF AREA SELECT*/V/P HOME/ MF/RAWK/P/A/S/M/TEST...
  • Page 150 Function HISTOGRAM SETTINGS HIGHLIGHT/SHADOW BACKLIT LCD VOLUME USB MODE LEVEL GAUGE 4 h TIMER PICTURE MODE SETTINGS EXP/e/ISO EV STEP METERING AELMetering ISO STEP ISO-AUTO SET ISO-AUTO BULB TIMER ANTI-SHOCKz #CUSTOM #X-SYNC. #SLOW LIMIT * Factory default setting Setting 8 SEC*/30 SEC/1 MIN/HOLD OFF/ON 0 to 5(3*) AUTO...
  • Page 151 Function K/ASPECT/COLOR/WB NOISE REDUCT. NOISE FILTER ALL > COLOR SPACE SHADING COMP. KSET PIXEL COUNT ASPECT SHOOTING RECORD/ERASE QUICK ERASE RAW+JPEG ERASE FILE NAME EDIT FILENAME PRIORITY SET dpi SETTING r/ COPYRIGHT SETTINGS MOVIE MOVIE R * Factory default setting Setting OFF/ON/AUTO* OFF/LOW/STANDARD*/HIGH...
  • Page 152 Function K UTILITY  PIXEL MAPPING EXPOSURE SHIFT CLEANING MODE EXT. WB DETECT AF FOCUS ADJ. AA BATTERY TYPE WARNING LEVEL LEVEL ADJUST * Factory default setting Setup Menu Function REC VIEW cMENU DISPLAY FIRMWARE * Factory default setting *1Settings differ depending on the region where the camera is purchased. Setting -1-0* to +1 OFF/ON...
  • Page 153: Specifications

    : Quick return half mirror Depth of field : Can be checked with the preview button Focusing screen : Fixed (Can be exchanged with FS-3 (available separately) at Olympus service station) Eyecup : Interchangeable Live view : Uses Live MOS sensor for shooting...
  • Page 154: Exposure Control

    : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL : Hot shoe, External flash connector (x attachment) : Compatible with the Olympus wireless RC flash system Microphone connector/HDMI mini connector (Type C)/ USB terminal/ AV OUT connector/ Remote cable connector/ External flash connector (x attachment) : Li-ion Battery (BLM-5) ×1...
  • Page 155: Operating Environment

    Dimensions/weight Dimensions : 142.5 mm (W) × 116.5 mm (H) × 74.5 mm (D) (5.6" × 4.6" × 2.9") (excluding protrusions) Weight : Approx. 892 g (2.0 Ib.) (Including battery/CF card) Operating environment Temperature : 0 °C - 40 °C (32 °F - 104 °F) (operation)/ -20 °C - 60 °C (-4 °F - 140 °F) (storage) Humidity : 30 - 90% (operation)/10 - 90% (storage)
  • Page 156: Safety Precautions

    SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. DANGER WARNING CAUTION WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
  • Page 157: Battery Handling Precautions

    Follow these important guidelines to prevent batteries from leaking, overheating, burning, exploding, or causing electrical shocks or burns.s DANGER • The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do not use any other chargers. • Never heat or incinerate batteries.
  • Page 158 • Always unload the battery from the camera before storing the camera for a long period. • This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe and proper use, read the battery’s instruction manual carefully before using it.
  • Page 159: Legal And Other Notices

    Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein.
  • Page 160: For Customers In Canada

    Using a non-genuine rechargeable battery and/or battery charger may result in fire or personal injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any liability for accidents or damage that may result from the use of a battery and/or battery charger that are not genuine Olympus accessories.
  • Page 161 Guarantee. This Guarantee is valid only if the Guarantee Certificate and proof of purchase are presented at the Olympus repair service station. Please note that this Guarantee is in addition to and does not affect the customer's legal warranty rights under the applicable national legislation governing the sale of consumer goods mentioned above.
  • Page 162 • “Shadow Adjustment Technology” function contains patented technologies from Apical Limited. • Four Thirds and the Four Thirds logo are trademarks or registered trademarks of OLYMPUS IMAGING Corporation in Japan, the United States, the countries of the European Union, and other countries.
  • Page 163: Index

    Index Symbols A ... 107 w+F ... 112 8 (Beep sound) ... 109, 150 W (Language selection) ... 99 KCONTROL SETTINGS ... 109 c Custom Menu ... 102, 148 n FUNCTION ... 107 O fps ... 108 q Playback Menu ... 147 K SET ...
  • Page 164 NATURAL j ...71 NOISE FILTER ...72, 113 NOISE REDUCT..72, 113 NTSC ...108 Number of pixels ...64 OLYMPUS Viewer 2 ...127 Olympus wireless RC flash system ...80 One-touch white balance V ...69, 106 PAL ...108 PALE&LIGHT COLOR  ...71 PD AFL ...103...
  • Page 165 PICT. TONE ... 71 PictBridge ... 123 Picture ... 70 PICTURE MODE ... 70 PICTURE MODE SETTINGS ... 111 PIN HOLE  ... 71 Pixel count ... 64, 114 PIXEL MAPPING ... 135 POP ART  ... 71 PORTRAIT c ... 71 Preset white balance ...
  • Page 166 Memo...
  • Page 167 Memo...
  • Page 168 Memo...
  • Page 169 Memo...
  • Page 170 Memo...
  • Page 171 Memo...
  • Page 172 Printed in China VR143802...

Table of Contents