Sterndrive Unit And Transom Assembly; Sterndrive U-Joint Shaft Splines And O-Rings (Sterndrive Unit Removed) - MerCruiser Axius 350 MAG User Manual

Tube Ref. No.

Sterndrive Unit and Transom Assembly

1. Lubricate gimbal bearing by applying approximately 8‑10 pumps of grease from a
typical hand‑operated grease gun.
Tube Ref No.
2. For propeller shaft lubrication, refer to Propellers.
Sterndrive U‑joint Shaft Splines And O‑rings (Sterndrive Unit Removed)
1. Coat sterndrive U‑joint O‑rings and driveshaft splines with grease.
Tube Ref No.
2. For propeller shaft lubrication, refer to Propellers.
90-899883234 JANUARY 2008
Description
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
a - Gimbal bearing grease fitting
Description
U-joint and Gimbal Bearing
42
Grease
a - Driveshaft splines
Description
Engine Coupler Spline Grease
91
Where Used
Shift cable pivot points & guide
contact surfaces
a
mc77068-1
Where Used
Gimbal bearing
b
a
8591
b - U‑joint O‑rings (3)
Where Used
Driveshaft splines and U-joint
O-rings
Section 5 - Maintenance
Part No.
92‑883725K01
Part No.
92-802870A1
Part No.
92-802869A 1
Page 91